This patch set is to support bucket in icc-rpm driver, so it implements the similar mechanism in the icc-rpmh driver. We can use interconnect path tag to indicate the bandwidth voting is for which buckets, and there have three kinds of buckets: AWC, wake and sleep, finally the wake and sleep bucket values are used to set the corresponding clock (active and sleep clocks). So far, we keep the AWC bucket but doesn't really use it. Patches 01, 02, 03 enable interconnect path tag and update the DT binding document; patches 04 and 05 support bucket and use bucket values to set the bandwidth and clock rates. This patch set is dependent on another patch set "interconnect: qcom: icc-rpm: Fix setting clock rate" [1], and it has been tested on QCOM msm8939 platform. [1] https://lore.kernel.org/lkml/20220416031029.693211-1-leo.yan@xxxxxxxxxx/ Leo Yan (5): dt-bindings: interconnect: Update property for icc-rpm path tag interconnect: qcom: Move qcom_icc_xlate_extended() to a common file interconnect: qcom: icc-rpm: Change to use qcom_icc_xlate_extended() interconnect: qcom: icc-rpm: Support multiple buckets interconnect: qcom: icc-rpm: Set bandwidth and clock for bucket values .../bindings/interconnect/qcom,rpm.yaml | 2 +- drivers/interconnect/qcom/Makefile | 3 + drivers/interconnect/qcom/icc-common.c | 34 +++++ drivers/interconnect/qcom/icc-common.h | 13 ++ drivers/interconnect/qcom/icc-rpm.c | 134 ++++++++++++++++-- drivers/interconnect/qcom/icc-rpm.h | 6 + drivers/interconnect/qcom/icc-rpmh.c | 26 +--- drivers/interconnect/qcom/icc-rpmh.h | 1 - drivers/interconnect/qcom/sm8450.c | 1 + 9 files changed, 178 insertions(+), 42 deletions(-) create mode 100644 drivers/interconnect/qcom/icc-common.c create mode 100644 drivers/interconnect/qcom/icc-common.h -- 2.25.1
