Enable I2C hosts that are (supposed to be) used on Rhine and add NXP
PN544 NFC node.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
.../dts/qcom-msm8974-sony-xperia-rhine.dtsi | 23 +++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
index 1120972ae4d2..15beb9df3631 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -85,6 +85,22 @@ rmi4-f11@11 {
};
};
+&blsp1_i2c6 {
+ status = "okay";
+ clock-frequency = <355000>;
+
+ nfc@28 {
+ compatible = "nxp,pn544-i2c";
+ reg = <0x28>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <59 IRQ_TYPE_EDGE_RISING>;
+
+ enable-gpios = <&pm8941_gpios 23 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>;
+ };
+};
+
&blsp1_uart2 {
status = "okay";
};
@@ -93,6 +109,13 @@ &blsp2_dma {
qcom,controlled-remotely;
};
+&blsp2_i2c5 {
+ status = "okay";
+ clock-frequency = <355000>;
+
+ /* sii8334 MHL HDMI bridge */
+};
+
&otg {
status = "okay";
--
2.35.2
