The cx-supply has been removed as it's supposed to be set on a
per-board basis.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 60 ++++++++++++++---------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 3370d48e9ad9..32938cdd5497 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -339,36 +339,6 @@ timer {
clock-frequency = <19200000>;
};
- remoteproc_adsp: adsp-pil {
- compatible = "qcom,msm8974-adsp-pil";
-
- interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
- cx-supply = <&pm8841_s2>;
-
- clocks = <&xo_board>;
- clock-names = "xo";
-
- memory-region = <&adsp_region>;
-
- qcom,smem-states = <&adsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- smd-edge {
- interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 8 8>;
- qcom,smd-edge = <1>;
-
- label = "lpass";
- };
- };
-
smem {
compatible = "qcom,smem";
@@ -1590,6 +1560,36 @@ dsi0_phy: dsi-phy@fd922a00 {
};
};
+ remoteproc_adsp: remoteproc@fe200000 {
+ compatible = "qcom,msm8974-adsp-pil";
+ reg = <0xfe200000 0x100>;
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&adsp_region>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ smd-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 8>;
+ qcom,smd-edge = <1>;
+ label = "lpass";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
imem: imem@fe805000 {
status = "disabled";
compatible = "syscon", "simple-mfd";
--
2.35.2
