Hi Dmitry Thanks for the review.Finally got back to this series after getting acks on the drm_writeback core changes.
On 2/4/2022 2:56 PM, Dmitry Baryshkov wrote:
I understand why you might think that way. Some bitfields in the register have the same name.On 05/02/2022 00:17, Abhinav Kumar wrote:Add the dpu_hw_wb abstraction to program registers related to the writeback block. These will be invoked once all the configuration is set and ready to be programmed to the registers.Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Few minor comments bellow.Signed-off-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> --- drivers/gpu/drm/msm/Makefile | 1 +drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c | 267 ++++++++++++++++++++++++++++++drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h | 145 ++++++++++++++++ 3 files changed, 413 insertions(+) create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile index 03ab55c..c43ef35 100644 --- a/drivers/gpu/drm/msm/Makefile +++ b/drivers/gpu/drm/msm/Makefile @@ -66,6 +66,7 @@ msm-y := \ disp/dpu1/dpu_hw_top.o \ disp/dpu1/dpu_hw_util.o \ disp/dpu1/dpu_hw_vbif.o \ + disp/dpu1/dpu_hw_wb.o \ disp/dpu1/dpu_io_util.o \ disp/dpu1/dpu_kms.o \ disp/dpu1/dpu_mdss.o \diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.cnew file mode 100644 index 0000000..d395475 --- /dev/null +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c @@ -0,0 +1,267 @@ +// SPDX-License-Identifier: GPL-2.0-only + /*+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved+ */ + +#include "dpu_hw_mdss.h" +#include "dpu_hwio.h" +#include "dpu_hw_catalog.h" +#include "dpu_hw_wb.h" +#include "dpu_formats.h" +#include "dpu_kms.h" + +#define WB_DST_FORMAT 0x000 +#define WB_DST_OP_MODE 0x004 +#define WB_DST_PACK_PATTERN 0x008 +#define WB_DST0_ADDR 0x00C +#define WB_DST1_ADDR 0x010 +#define WB_DST2_ADDR 0x014 +#define WB_DST3_ADDR 0x018 +#define WB_DST_YSTRIDE0 0x01C +#define WB_DST_YSTRIDE1 0x020 +#define WB_DST_YSTRIDE1 0x020 +#define WB_DST_DITHER_BITDEPTH 0x024 +#define WB_DST_MATRIX_ROW0 0x030 +#define WB_DST_MATRIX_ROW1 0x034 +#define WB_DST_MATRIX_ROW2 0x038 +#define WB_DST_MATRIX_ROW3 0x03C +#define WB_DST_WRITE_CONFIG 0x048 +#define WB_ROTATION_DNSCALER 0x050 +#define WB_ROTATOR_PIPE_DOWNSCALER 0x054 +#define WB_N16_INIT_PHASE_X_C03 0x060 +#define WB_N16_INIT_PHASE_X_C12 0x064 +#define WB_N16_INIT_PHASE_Y_C03 0x068 +#define WB_N16_INIT_PHASE_Y_C12 0x06C +#define WB_OUT_SIZE 0x074 +#define WB_ALPHA_X_VALUE 0x078 +#define WB_DANGER_LUT 0x084 +#define WB_SAFE_LUT 0x088 +#define WB_QOS_CTRL 0x090 +#define WB_CREQ_LUT_0 0x098 +#define WB_CREQ_LUT_1 0x09C +#define WB_UBWC_STATIC_CTRL 0x144 +#define WB_MUX 0x150 +#define WB_CROP_CTRL 0x154 +#define WB_CROP_OFFSET 0x158 +#define WB_CSC_BASE 0x260 +#define WB_DST_ADDR_SW_STATUS 0x2B0 +#define WB_CDP_CNTL 0x2B4 +#define WB_OUT_IMAGE_SIZE 0x2C0 +#define WB_OUT_XY 0x2C4 + +/* WB_QOS_CTRL */ +#define WB_QOS_CTRL_DANGER_SAFE_EN BIT(0) + +static const struct dpu_wb_cfg *_wb_offset(enum dpu_wb wb, + const struct dpu_mdss_cfg *m, void __iomem *addr, + struct dpu_hw_blk_reg_map *b) +{ + int i; + + for (i = 0; i < m->wb_count; i++) { + if (wb == m->wb[i].id) { + b->base_off = addr; + b->blk_off = m->wb[i].base; + b->length = m->wb[i].len; + b->hwversion = m->hwversion; + return &m->wb[i]; + } + } + return ERR_PTR(-EINVAL); +} + +static void dpu_hw_wb_setup_outaddress(struct dpu_hw_wb *ctx, + struct dpu_hw_wb_cfg *data) +{ + struct dpu_hw_blk_reg_map *c = &ctx->hw; + + DPU_REG_WRITE(c, WB_DST0_ADDR, data->dest.plane_addr[0]); + DPU_REG_WRITE(c, WB_DST1_ADDR, data->dest.plane_addr[1]); + DPU_REG_WRITE(c, WB_DST2_ADDR, data->dest.plane_addr[2]); + DPU_REG_WRITE(c, WB_DST3_ADDR, data->dest.plane_addr[3]); +} + +static void dpu_hw_wb_setup_format(struct dpu_hw_wb *ctx, + struct dpu_hw_wb_cfg *data) +{ + struct dpu_hw_blk_reg_map *c = &ctx->hw; + const struct dpu_format *fmt = data->dest.format; + u32 dst_format, pattern, ystride0, ystride1, outsize, chroma_samp; + u32 write_config = 0; + u32 opmode = 0; + u32 dst_addr_sw = 0; + + chroma_samp = fmt->chroma_sample; + + dst_format = (chroma_samp << 23) | + (fmt->fetch_planes << 19) | + (fmt->bits[C3_ALPHA] << 6) | + (fmt->bits[C2_R_Cr] << 4) | + (fmt->bits[C1_B_Cb] << 2) | + (fmt->bits[C0_G_Y] << 0); + + if (fmt->bits[C3_ALPHA] || fmt->alpha_enable) { + dst_format |= BIT(8); /* DSTC3_EN */ + if (!fmt->alpha_enable || + !(ctx->caps->features & BIT(DPU_WB_PIPE_ALPHA))) + dst_format |= BIT(14); /* DST_ALPHA_X */ + } + + pattern = (fmt->element[3] << 24) | + (fmt->element[2] << 16) | + (fmt->element[1] << 8) | + (fmt->element[0] << 0); + + dst_format |= (fmt->unpack_align_msb << 18) | + (fmt->unpack_tight << 17) | + ((fmt->unpack_count - 1) << 12) | + ((fmt->bpp - 1) << 9); + + ystride0 = data->dest.plane_pitch[0] | + (data->dest.plane_pitch[1] << 16); + ystride1 = data->dest.plane_pitch[2] | + (data->dest.plane_pitch[3] << 16); + + if (drm_rect_height(&data->roi) && drm_rect_width(&data->roi))+ outsize = (drm_rect_height(&data->roi) << 16) | drm_rect_width(&data->roi);+ else + outsize = (data->dest.height << 16) | data->dest.width; + + DPU_REG_WRITE(c, WB_ALPHA_X_VALUE, 0xFF); + DPU_REG_WRITE(c, WB_DST_FORMAT, dst_format); + DPU_REG_WRITE(c, WB_DST_OP_MODE, opmode); + DPU_REG_WRITE(c, WB_DST_PACK_PATTERN, pattern); + DPU_REG_WRITE(c, WB_DST_YSTRIDE0, ystride0); + DPU_REG_WRITE(c, WB_DST_YSTRIDE1, ystride1); + DPU_REG_WRITE(c, WB_OUT_SIZE, outsize); + DPU_REG_WRITE(c, WB_DST_WRITE_CONFIG, write_config); + DPU_REG_WRITE(c, WB_DST_ADDR_SW_STATUS, dst_addr_sw); +} ++static void dpu_hw_wb_roi(struct dpu_hw_wb *ctx, struct dpu_hw_wb_cfg *wb)+{ + struct dpu_hw_blk_reg_map *c = &ctx->hw; + u32 image_size, out_size, out_xy; + + image_size = (wb->dest.height << 16) | wb->dest.width; + out_xy = 0;+ out_size = (drm_rect_height(&wb->roi) << 16) | drm_rect_width(&wb->roi);+ + DPU_REG_WRITE(c, WB_OUT_IMAGE_SIZE, image_size); + DPU_REG_WRITE(c, WB_OUT_XY, out_xy); + DPU_REG_WRITE(c, WB_OUT_SIZE, out_size); +} + +static void dpu_hw_wb_setup_qos_lut(struct dpu_hw_wb *ctx, + struct dpu_hw_wb_qos_cfg *cfg) +{ + struct dpu_hw_blk_reg_map *c = &ctx->hw; + u32 qos_ctrl = 0; + + if (!ctx || !cfg) + return; + + DPU_REG_WRITE(c, WB_DANGER_LUT, cfg->danger_lut); + DPU_REG_WRITE(c, WB_SAFE_LUT, cfg->safe_lut); + + if (ctx->caps && test_bit(DPU_WB_QOS_8LVL, &ctx->caps->features)) { + DPU_REG_WRITE(c, WB_CREQ_LUT_0, cfg->creq_lut); + DPU_REG_WRITE(c, WB_CREQ_LUT_1, cfg->creq_lut >> 32); + } + + if (cfg->danger_safe_en) + qos_ctrl |= WB_QOS_CTRL_DANGER_SAFE_EN; + + DPU_REG_WRITE(c, WB_QOS_CTRL, qos_ctrl); +} + +static void dpu_hw_wb_setup_cdp(struct dpu_hw_wb *ctx, + struct dpu_hw_wb_cdp_cfg *cfg) +{ + struct dpu_hw_blk_reg_map *c; + u32 cdp_cntl = 0; + + if (!ctx || !cfg) + return; + + c = &ctx->hw; + + if (cfg->enable) + cdp_cntl |= BIT(0); + if (cfg->ubwc_meta_enable) + cdp_cntl |= BIT(1); + if (cfg->preload_ahead == DPU_WB_CDP_PRELOAD_AHEAD_64) + cdp_cntl |= BIT(3); + + DPU_REG_WRITE(c, WB_CDP_CNTL, cdp_cntl); +}I thought for a moment if we can unify these several functions with SSPP code. Most probably we can, but I'm not sure that it make sense.
Both SSPP and WB do have CDP_CNTL but with some different bit definitions and ofcourse the register offsets are different.
So I think we are better off them being separate right now.
Yes correct. I can also preserve the upper bits here while posting the next version.+ +static void dpu_hw_wb_bind_pingpong_blk( + struct dpu_hw_wb *ctx, + bool enable, const enum dpu_pingpong pp) +{ + struct dpu_hw_blk_reg_map *c; + int mux_cfg = 0xF; + + if (!ctx) + return; + + c = &ctx->hw; + if (enable) + mux_cfg = (pp - PINGPONG_0) & 0x7;Just noticed that dpu_hw_intf_bind_pingpong_blk() keeps higher bits rather than setting them to 0. Which policy should we follow here?
+ + DPU_REG_WRITE(c, WB_MUX, mux_cfg); +} + +static void _setup_wb_ops(struct dpu_hw_wb_ops *ops, + unsigned long features) +{ + ops->setup_outaddress = dpu_hw_wb_setup_outaddress; + ops->setup_outformat = dpu_hw_wb_setup_format; + + if (test_bit(DPU_WB_XY_ROI_OFFSET, &features)) + ops->setup_roi = dpu_hw_wb_roi; + + if (test_bit(DPU_WB_QOS, &features)) + ops->setup_qos_lut = dpu_hw_wb_setup_qos_lut; + + if (test_bit(DPU_WB_CDP, &features)) + ops->setup_cdp = dpu_hw_wb_setup_cdp; + + if (test_bit(DPU_WB_INPUT_CTRL, &features)) + ops->bind_pingpong_blk = dpu_hw_wb_bind_pingpong_blk; +} + +struct dpu_hw_wb *dpu_hw_wb_init(enum dpu_wb idx, + void __iomem *addr, const struct dpu_mdss_cfg *m) +{ + struct dpu_hw_wb *c; + const struct dpu_wb_cfg *cfg; + + if (!addr || !m) + return ERR_PTR(-EINVAL); + + c = kzalloc(sizeof(*c), GFP_KERNEL); + if (!c) + return ERR_PTR(-ENOMEM); + + cfg = _wb_offset(idx, m, addr, &c->hw); + if (IS_ERR(cfg)) { + WARN(1, "Unable to find wb idx=%d\n", idx); + kfree(c); + return ERR_PTR(-EINVAL); + } + + /* Assign ops */ + c->mdp = &m->mdp[0]; + c->idx = idx; + c->caps = cfg; + _setup_wb_ops(&c->ops, c->caps->features); + + return c; +} + +void dpu_hw_wb_destroy(struct dpu_hw_wb *hw_wb) +{ + kfree(hw_wb); +}diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.hnew file mode 100644 index 0000000..39d745f --- /dev/null +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h @@ -0,0 +1,145 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/*+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved+ */ + +#ifndef _DPU_HW_WB_H +#define _DPU_HW_WB_H + +#include "dpu_hw_catalog.h" +#include "dpu_hw_mdss.h" +#include "dpu_hw_top.h" +#include "dpu_hw_util.h" +#include "dpu_hw_pingpong.h" + +struct dpu_hw_wb; + +struct dpu_hw_wb_cfg { + struct dpu_hw_fmt_layout dest; + enum dpu_intf_mode intf_mode; + struct drm_rect roi; + struct drm_rect crop; +}; + +/** + * enum CDP preload ahead address size + */ +enum { + DPU_WB_CDP_PRELOAD_AHEAD_32, + DPU_WB_CDP_PRELOAD_AHEAD_64 +}; + +/** + * struct dpu_hw_wb_cdp_cfg : CDP configuration + * @enable: true to enable CDP + * @ubwc_meta_enable: true to enable ubwc metadata preload+ * @tile_amortize_enable: true to enable amortization control for tile format+ * @preload_ahead: number of request to preload ahead + * SDE_WB_CDP_PRELOAD_AHEAD_32, + * SDE_WB_CDP_PRELOAD_AHEAD_64 + */ +struct dpu_hw_wb_cdp_cfg { + bool enable; + bool ubwc_meta_enable; + bool tile_amortize_enable; + u32 preload_ahead; +}; + +/** + * struct dpu_hw_wb_qos_cfg : Writeback pipe QoS configuration + * @danger_lut: LUT for generate danger level based on fill level + * @safe_lut: LUT for generate safe level based on fill level + * @creq_lut: LUT for generate creq level based on fill level + * @danger_safe_en: enable danger safe generation + */ +struct dpu_hw_wb_qos_cfg { + u32 danger_lut; + u32 safe_lut; + u64 creq_lut; + bool danger_safe_en; +}; + +/** + * + * struct dpu_hw_wb_ops : Interface to the wb hw driver functions+ * Assumption is these functions will be called after clocks are enabled+ * @setup_outaddress: setup output address from the writeback job+ * @setup_outformat: setup output format of writeback block from writeback job+ * @setup_qos_lut: setup qos LUT for writeback block based on input+ * @setup_cdp: setup chroma down prefetch block for writeback block + * @bind_pingpong_blk: enable/disable the connection with ping-pong block+ */ +struct dpu_hw_wb_ops { + void (*setup_outaddress)(struct dpu_hw_wb *ctx, + struct dpu_hw_wb_cfg *wb); + + void (*setup_outformat)(struct dpu_hw_wb *ctx, + struct dpu_hw_wb_cfg *wb); + + void (*setup_roi)(struct dpu_hw_wb *ctx, + struct dpu_hw_wb_cfg *wb); + + void (*setup_qos_lut)(struct dpu_hw_wb *ctx, + struct dpu_hw_wb_qos_cfg *cfg); + + void (*setup_cdp)(struct dpu_hw_wb *ctx, + struct dpu_hw_wb_cdp_cfg *cfg); + + void (*bind_pingpong_blk)(struct dpu_hw_wb *ctx, + bool enable, const enum dpu_pingpong pp); +}; + +/** + * struct dpu_hw_wb : WB driver object + * @base: hardware block base structure + * @hw: block hardware details + * @mdp: pointer to associated mdp portion of the catalog + * @idx: hardware index number within type + * @wb_hw_caps: hardware capabilities + * @ops: function pointers + * @hw_mdp: MDP top level hardware block + */ +struct dpu_hw_wb { + struct dpu_hw_blk base; + struct dpu_hw_blk_reg_map hw; + const struct dpu_mdp_cfg *mdp; + + /* wb path */ + int idx; + const struct dpu_wb_cfg *caps; + + /* ops */ + struct dpu_hw_wb_ops ops; + + struct dpu_hw_mdp *hw_mdp; +}; + +/** + * dpu_hw_wb - convert base object dpu_hw_base to container + * @hw: Pointer to base hardware block + * return: Pointer to hardware block container + */ +static inline struct dpu_hw_wb *to_dpu_hw_wb(struct dpu_hw_blk *hw) +{ + return container_of(hw, struct dpu_hw_wb, base); +} + +/** + * dpu_hw_wb_init(): Initializes and return writeback hw driver object. + * @idx: wb_path index for which driver object is required + * @addr: mapped register io address of MDP + * @m : pointer to mdss catalog data + */ +struct dpu_hw_wb *dpu_hw_wb_init(enum dpu_wb idx, + void __iomem *addr, + const struct dpu_mdss_cfg *m); + +/** + * dpu_hw_wb_destroy(): Destroy writeback hw driver object. + * @hw_wb: Pointer to writeback hw driver object + */ +void dpu_hw_wb_destroy(struct dpu_hw_wb *hw_wb); + +#endif /*_DPU_HW_WB_H */ + +extra empty lines in the end
ack
