Re: [PATCH v2 2/3] phy: qcom-snps: Add support for overriding phy tuning parameters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03-03-22, 11:43, Sandeep Maheswaram wrote:
> Added support for overriding x0,x1,x2,x3 params for SNPS PHY by reading
> values from device tree.
> 
> Signed-off-by: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
> ---
>  drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 192 ++++++++++++++++++++++++++
>  1 file changed, 192 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> index 7e61202..b5aa06d 100644
> --- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> +++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> @@ -51,6 +51,48 @@
>  #define USB2_SUSPEND_N				BIT(2)
>  #define USB2_SUSPEND_N_SEL			BIT(3)
>  
> +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0	(0x6c)
> +
> +/*USB_PHY_HS_PHY_OVERRIDE_X0 register bits*/

space after /* and before */ (checkpatch.pl --strict would warn you)
Pls fix it everywhere

> +#define HS_DISCONNECT_MASK			GENMASK(2, 0)
> +#define HS_DISCONNECT_SHIFT			0x0
> +
> +#define SQUELCH_DETECTOR_MASK			GENMASK(7, 5)
> +#define SQUELCH_DETECTOR_SHIFT			0x5
> +
> +
> +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1	(0x70)
> +
> +/*USB_PHY_HS_PHY_OVERRIDE_X1 register bits*/
> +#define HS_AMPLITUDE_MASK			GENMASK(3, 0)
> +#define HS_AMPLITUDE_SHIFT			0x0
> +
> +#define PREEMPHASIS_DURATION_MASK		BIT(5)
> +#define PREEMPHASIS_DURATION_SHIFT		0x5
> +
> +#define PREEMPHASIS_AMPLITUDE_MASK		GENMASK(7, 6)
> +#define PREEMPHASIS_AMPLITUDE_SHIFT		0x6
> +
> +
> +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2	(0x74)
> +
> +/*USB_PHY_HS_PHY_OVERRIDE_X2 register bits*/
> +#define HS_RISE_FALL_MASK			GENMASK(1, 0)
> +#define HS_RISE_FALL_SHIFT			0x0
> +
> +#define HS_CROSSOVER_VOLTAGE_MASK		GENMASK(3, 2)
> +#define HS_CROSSOVER_VOLTAGE_SHIFT		0x2
> +
> +#define HS_OUTPUT_IMPEDANCE_MASK		GENMASK(5, 4)
> +#define HS_OUTPUT_IMPEDANCE_SHIFT		0x4
> +
> +
> +#define USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X3	(0x78)
> +
> +/*USB_PHY_HS_PHY_OVERRIDE_X3 register bits*/
> +#define LS_FS_OUTPUT_IMPEDANCE_MASK		GENMASK(3, 0)
> +#define LS_FS_OUTPUT_IMPEDANCE_SHIFT		0x0
> +
>  #define USB2_PHY_USB_PHY_CFG0			(0x94)
>  #define UTMI_PHY_DATAPATH_CTRL_OVERRIDE_EN	BIT(0)
>  #define UTMI_PHY_CMN_CTRL_OVERRIDE_EN		BIT(1)
> @@ -65,6 +107,43 @@ static const char * const qcom_snps_hsphy_vreg_names[] = {
>  
>  #define SNPS_HS_NUM_VREGS		ARRAY_SIZE(qcom_snps_hsphy_vreg_names)
>  
> +/* struct override_param - structure holding snps phy overriding param
> + * set override true if the  device tree property exists and read and assign
> + * to value
> + */
> +struct override_param {
> +	bool override;
> +	u8 value;
> +};
> +
> +/*struct override_params - structure holding snps phy overriding params
> + * @hs_disconnect: disconnect threshold
> + * @squelch_detector: threshold to detect valid high-speed data
> + * @hs_amplitude: high-speed DC level voltage
> + * @preemphasis_duration: duration for which the HS pre-emphasis current
> + *  is sourced onto DP<#> or DM<#>
> + * @preemphasis_amplitude: current sourced to DP<#> and DM<#> after
> + *  a J-to-K or K-to-J transition.
> + * @hs_rise_fall_time: rise/fall times of the high-speed waveform
> + * @hs_crossover_voltage: voltage at which the DP<#> and DM<#>
> + *  signals cross while transmitting in HS mode
> + * @hs_output_impedance: driver source impedance to compensate for added series
> + *  resistance on the USB
> + * @ls_fs_output_impedance: low and full-speed single-ended source
> + *  impedance while driving high
> + */
> +struct override_params {
> +	struct override_param hs_disconnect;
> +	struct override_param squelch_detector;
> +	struct override_param hs_amplitude;
> +	struct override_param preemphasis_duration;
> +	struct override_param preemphasis_amplitude;
> +	struct override_param hs_rise_fall_time;
> +	struct override_param hs_crossover_voltage;
> +	struct override_param hs_output_impedance;
> +	struct override_param ls_fs_output_impedance;
> +};
> +
>  /**
>   * struct qcom_snps_hsphy - snps hs phy attributes
>   *
> @@ -87,6 +166,7 @@ struct qcom_snps_hsphy {
>  	struct clk *ref_clk;
>  	struct reset_control *phy_reset;
>  	struct regulator_bulk_data vregs[SNPS_HS_NUM_VREGS];
> +	struct override_params overrides;
>  
>  	bool phy_initialized;
>  	enum phy_mode mode;
> @@ -175,6 +255,7 @@ static int qcom_snps_hsphy_set_mode(struct phy *phy, enum phy_mode mode,
>  static int qcom_snps_hsphy_init(struct phy *phy)
>  {
>  	struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
> +	struct override_params *or = &hsphy->overrides;
>  	int ret;
>  
>  	dev_vdbg(&phy->dev, "%s(): Initializing SNPS HS phy\n", __func__);
> @@ -222,6 +303,60 @@ static int qcom_snps_hsphy_init(struct phy *phy)
>  	qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1,
>  					VBUSVLDEXT0, VBUSVLDEXT0);
>  
> +	if (or->hs_disconnect.override)
> +		qcom_snps_hsphy_write_mask(hsphy->base,
> +			USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0,
> +			HS_DISCONNECT_MASK,
> +			or->hs_disconnect.value << HS_DISCONNECT_SHIFT);
> +
> +	if (or->squelch_detector.override)
> +		qcom_snps_hsphy_write_mask(hsphy->base,
> +			USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X0,
> +			SQUELCH_DETECTOR_MASK,
> +			or->squelch_detector.value << SQUELCH_DETECTOR_SHIFT);
> +
> +	if (or->hs_amplitude.override)
> +		qcom_snps_hsphy_write_mask(hsphy->base,
> +			USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1,
> +			HS_AMPLITUDE_MASK,
> +			or->hs_amplitude.value << HS_AMPLITUDE_SHIFT);
> +
> +	if (or->preemphasis_duration.override)
> +		qcom_snps_hsphy_write_mask(hsphy->base,
> +			USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1,
> +			PREEMPHASIS_DURATION_MASK,
> +			or->preemphasis_duration.value << PREEMPHASIS_DURATION_SHIFT);
> +
> +	if (or->preemphasis_amplitude.override)
> +		qcom_snps_hsphy_write_mask(hsphy->base,
> +			USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X1,
> +			PREEMPHASIS_AMPLITUDE_MASK,
> +			or->preemphasis_amplitude.value << PREEMPHASIS_AMPLITUDE_SHIFT);
> +
> +	if (or->hs_rise_fall_time.override)
> +		qcom_snps_hsphy_write_mask(hsphy->base,
> +			USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2,
> +			HS_RISE_FALL_MASK,
> +			or->hs_rise_fall_time.value << HS_RISE_FALL_SHIFT);
> +
> +	if (or->hs_crossover_voltage.override)
> +		qcom_snps_hsphy_write_mask(hsphy->base,
> +			USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2,
> +			HS_CROSSOVER_VOLTAGE_MASK,
> +			or->hs_crossover_voltage.value << HS_CROSSOVER_VOLTAGE_SHIFT);
> +
> +	if (or->hs_output_impedance.override)
> +		qcom_snps_hsphy_write_mask(hsphy->base,
> +			USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X2,
> +			HS_OUTPUT_IMPEDANCE_MASK,
> +			or->hs_output_impedance.value << HS_OUTPUT_IMPEDANCE_SHIFT);
> +
> +	if (or->ls_fs_output_impedance.override)
> +		qcom_snps_hsphy_write_mask(hsphy->base,
> +			USB2_PHY_USB_PHY_HS_PHY_OVERRIDE_X3,
> +			LS_FS_OUTPUT_IMPEDANCE_MASK,
> +			or->ls_fs_output_impedance.value << LS_FS_OUTPUT_IMPEDANCE_SHIFT);
> +
>  	qcom_snps_hsphy_write_mask(hsphy->base,
>  					USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2,
>  					VREGBYPASS, VREGBYPASS);
> @@ -292,12 +427,15 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev)
>  	struct qcom_snps_hsphy *hsphy;
>  	struct phy_provider *phy_provider;
>  	struct phy *generic_phy;
> +	struct override_params *or;
>  	int ret, i;
>  	int num;
> +	u32 value;
>  
>  	hsphy = devm_kzalloc(dev, sizeof(*hsphy), GFP_KERNEL);
>  	if (!hsphy)
>  		return -ENOMEM;
> +	or = &hsphy->overrides;
>  
>  	hsphy->base = devm_platform_ioremap_resource(pdev, 0);
>  	if (IS_ERR(hsphy->base))
> @@ -329,6 +467,60 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> +	if (!of_property_read_u32(dev->of_node, "qcom,hs-disconnect",
> +				  &value)) {
> +		or->hs_disconnect.value = (u8)value;
> +		or->hs_disconnect.override = true;
> +	}
> +
> +	if (!of_property_read_u32(dev->of_node, "qcom,squelch-detector",
> +				  &value)) {
> +		or->squelch_detector.value = (u8)value;
> +		or->squelch_detector.override = true;
> +	}
> +
> +	if (!of_property_read_u32(dev->of_node, "qcom,hs-amplitude",
> +				  &value)) {
> +		or->hs_amplitude.value = (u8)value;
> +		or->hs_amplitude.override = true;
> +	}
> +
> +	if (!of_property_read_u32(dev->of_node, "qcom,preemphasis-duration",
> +				  &value)) {
> +		or->preemphasis_duration.value = (u8)value;
> +		or->preemphasis_duration.override = true;
> +	}
> +
> +	if (!of_property_read_u32(dev->of_node, "qcom,preemphasis-amplitude",
> +				  &value)) {
> +		or->preemphasis_amplitude.value = (u8)value;
> +		or->preemphasis_amplitude.override = true;
> +	}
> +
> +	if (!of_property_read_u32(dev->of_node, "qcom,hs-rise-fall-time",
> +				  &value)) {
> +		or->hs_rise_fall_time.value = (u8)value;
> +		or->hs_rise_fall_time.override = true;
> +	}
> +
> +	if (!of_property_read_u32(dev->of_node, "qcom,hs-crossover-voltage",
> +				  &value)) {
> +		or->hs_crossover_voltage.value = (u8)value;
> +		or->hs_crossover_voltage.override = true;
> +	}
> +
> +	if (!of_property_read_u32(dev->of_node, "qcom,hs-output-impedance",
> +				  &value)) {
> +		or->hs_output_impedance.value = (u8)value;
> +		or->hs_output_impedance.override = true;
> +	}
> +
> +	if (!of_property_read_u32(dev->of_node, "qcom,ls-fs-output-impedance",
> +				  &value)) {
> +		or->ls_fs_output_impedance.value = (u8)value;
> +		or->ls_fs_output_impedance.override = true;
> +	}

Are all these values board specific or IP specific? Can we add these
values as tables in driver? 

Bjorn what do you think about the above proposal?

-- 
~Vinod



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux