Re: [PATCH 2/2] phy: qcom-qmp: Add support for SDX65 QMP PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 12, 2022 at 10:47:32AM +0530, Rohit Agarwal wrote:
> Add support for USB3 QMP PHY found in SDX65 platform. SDX65 uses
> version 5.0.0 of the QMP PHY IP.
> 
> Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>

I don't have access to SDX65 downstream devicetree source but overall it looks
good to me.

Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

Thanks,
Mani

> ---
>  drivers/phy/qualcomm/phy-qcom-qmp.c | 76 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 76 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index 8ea87c6..58506b8 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -2535,6 +2535,50 @@ static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_misc_tbl[] = {
>  	QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_MX_CTRL2, 0x00),
>  };
>  
> +static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_tx_tbl[] = {
> +	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x1f),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0b),
> +};
> +
> +static const struct qmp_phy_init_tbl sdx65_usb3_uniphy_rx_tbl[] = {
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
> +	QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
> +};
> +
>  static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = {
>  	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9),
>  	QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11),
> @@ -4217,6 +4261,35 @@ static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
>  	.pwrdn_delay_max	= 1005,		/* us */
>  };
>  
> +static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
> +	.type			= PHY_TYPE_USB3,
> +	.nlanes			= 1,
> +
> +	.serdes_tbl		= sm8150_usb3_uniphy_serdes_tbl,
> +	.serdes_tbl_num		= ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
> +	.tx_tbl			= sdx65_usb3_uniphy_tx_tbl,
> +	.tx_tbl_num		= ARRAY_SIZE(sdx65_usb3_uniphy_tx_tbl),
> +	.rx_tbl			= sdx65_usb3_uniphy_rx_tbl,
> +	.rx_tbl_num		= ARRAY_SIZE(sdx65_usb3_uniphy_rx_tbl),
> +	.pcs_tbl		= sm8350_usb3_uniphy_pcs_tbl,
> +	.pcs_tbl_num		= ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
> +	.clk_list		= qmp_v4_sdx55_usbphy_clk_l,
> +	.num_clks		= ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
> +	.reset_list		= msm8996_usb3phy_reset_l,
> +	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
> +	.vreg_list		= qmp_phy_vreg_l,
> +	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
> +	.regs			= sm8350_usb3_uniphy_regs_layout,
> +
> +	.start_ctrl		= SERDES_START | PCS_START,
> +	.pwrdn_ctrl		= SW_PWRDN,
> +	.phy_status		= PHYSTATUS,
> +
> +	.has_pwrdn_delay	= true,
> +	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
> +	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
> +};
> +
>  static const struct qmp_phy_cfg sm8350_ufsphy_cfg = {
>  	.type			= PHY_TYPE_UFS,
>  	.nlanes			= 2,
> @@ -6044,6 +6117,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
>  		.compatible = "qcom,sdx55-qmp-usb3-uni-phy",
>  		.data = &sdx55_usb3_uniphy_cfg,
>  	}, {
> +		.compatible = "qcom,sdx65-qmp-usb3-uni-phy",
> +		.data = &sdx65_usb3_uniphy_cfg,
> +	}, {
>  		.compatible = "qcom,sm8350-qmp-usb3-phy",
>  		.data = &sm8350_usb3phy_cfg,
>  	}, {
> -- 
> 2.7.4
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux