Re: [PATCH] clk: qcom: rpmh: Set wake/sleep state for BCM clks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/12/22 2:45 PM, Stephen Boyd wrote:
Set the wake and sleep state for BCM clks here, not just the active
state, as the active only state is dropped when CPUs go to deep idle.
This ensures the clk is always on when the driver thinks it is on.

This was found by inspection, and could very well be incorrect if the
RPMh hardware copies over the active only state to the sleep and wake
states.

I ran with this code and found no obvious errors.  And
it looks reasonable to me.

However someone (probably Taniya) needs to comment on
whether it's the right thing to do (based on Stephen's
second paragraph above), or if not, why not.  It might
warrant an additional comment also.

I can add a "Tested-by" but I'm going to wait for
some more input.

					-Alex

Cc: Alex Elder <elder@xxxxxxxxxx>
Cc: Taniya Das <quic_tdas@xxxxxxxxxxx>
Fixes: 04053f4d23a4 ("clk: qcom: clk-rpmh: Add IPA clock support")
Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
  drivers/clk/qcom/clk-rpmh.c | 19 ++++++++++++-------
  1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
index aed907982344..29da1ffd10cf 100644
--- a/drivers/clk/qcom/clk-rpmh.c
+++ b/drivers/clk/qcom/clk-rpmh.c
@@ -260,6 +260,7 @@ static int clk_rpmh_bcm_send_cmd(struct clk_rpmh *c, bool enable)
  	struct tcs_cmd cmd = { 0 };
  	u32 cmd_state;
  	int ret = 0;
+	enum rpmh_state state;
mutex_lock(&rpmh_clk_lock);
  	if (enable) {
@@ -274,15 +275,19 @@ static int clk_rpmh_bcm_send_cmd(struct clk_rpmh *c, bool enable)
  		cmd.addr = c->res_addr;
  		cmd.data = BCM_TCS_CMD(1, enable, 0, cmd_state);
- ret = clk_rpmh_send(c, RPMH_ACTIVE_ONLY_STATE, &cmd, enable);
-		if (ret) {
-			dev_err(c->dev, "set active state of %s failed: (%d)\n",
-				c->res_name, ret);
-		} else {
-			c->last_sent_aggr_state = cmd_state;
+		for (state = RPMH_SLEEP_STATE; state <= RPMH_ACTIVE_ONLY_STATE; state++) {
+			ret = clk_rpmh_send(c, state, &cmd, enable);
+			if (ret) {
+				dev_err(c->dev, "set %s state of %s failed: (%d)\n",
+					!state ? "sleep" :
+					state == RPMH_WAKE_ONLY_STATE	?
+					"wake" : "active", c->res_name, ret);
+				goto out;
+			}
  		}
+		c->last_sent_aggr_state = cmd_state;
  	}
-
+out:
  	mutex_unlock(&rpmh_clk_lock);
return ret;

base-commit: 3123109284176b1532874591f7c81f3837bbdc17




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux