Re: [PATCH v13 2/6] usb: dwc3: core: Host wake up support from system suspend

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 12, 2022 at 12:46:50AM +0530, Sandeep Maheswaram wrote:
> During suspend read the status of all port and set hs phy mode
> based on current speed. Use this hs phy mode to configure wakeup
> interrupts in qcom glue driver.
> 
> Check wakep-source property for dwc3 core node to set the

s/wakep/wakeup/

> wakeup capability. Drop the device_init_wakeup call from
> runtime suspend and resume.
> 
> Also check during suspend if any wakeup capable devices are
> connected to the controller (directly or through hubs), if there
> are none set a flag to indicate that the PHY is powered
> down during suspend.
> 
> Signed-off-by: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
> ---

A per-patch change log would be really helpful for reviewers, even
if it doesn't include older versions.

>  drivers/usb/dwc3/core.c | 33 ++++++++++++++++++++-------------
>  drivers/usb/dwc3/core.h |  4 ++++
>  drivers/usb/dwc3/host.c | 25 +++++++++++++++++++++++++
>  3 files changed, 49 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 1170b80..effaa43 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -32,6 +32,7 @@
>  #include <linux/usb/gadget.h>
>  #include <linux/usb/of.h>
>  #include <linux/usb/otg.h>
> +#include <linux/usb/hcd.h>
>  
>  #include "core.h"
>  #include "gadget.h"
> @@ -1723,6 +1724,7 @@ static int dwc3_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, dwc);
>  	dwc3_cache_hwparams(dwc);
> +	device_init_wakeup(&pdev->dev, of_property_read_bool(dev->of_node, "wakeup-source"));
>  
>  	spin_lock_init(&dwc->lock);
>  	mutex_init(&dwc->mutex);
> @@ -1865,6 +1867,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
>  {
>  	unsigned long	flags;
>  	u32 reg;
> +	struct usb_hcd  *hcd = platform_get_drvdata(dwc->xhci);
>  
>  	switch (dwc->current_dr_role) {
>  	case DWC3_GCTL_PRTCAP_DEVICE:
> @@ -1877,10 +1880,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
>  		dwc3_core_exit(dwc);
>  		break;
>  	case DWC3_GCTL_PRTCAP_HOST:
> -		if (!PMSG_IS_AUTO(msg)) {
> -			dwc3_core_exit(dwc);
> -			break;
> -		}
> +		dwc3_check_phy_speed_mode(dwc);
>  
>  		/* Let controller to suspend HSPHY before PHY driver suspends */
>  		if (dwc->dis_u2_susphy_quirk ||
> @@ -1896,6 +1896,16 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
>  
>  		phy_pm_runtime_put_sync(dwc->usb2_generic_phy);
>  		phy_pm_runtime_put_sync(dwc->usb3_generic_phy);
> +
> +		if (!PMSG_IS_AUTO(msg)) {
> +			if (device_may_wakeup(dwc->dev) &&
> +			    usb_wakeup_enabled_descendants(hcd->self.root_hub)) {

You did not answer my question on v12, reposting it:

  Did you ever try whether you could use device_children_wakeup_capable() from
  [1] instead of usb_wakeup_enabled_descendants()?

  [1] https://patchwork.kernel.org/project/linux-usb/patch/1635753224-23975-2-git-send-email-quic_c_sanm@xxxxxxxxxxx/#24566065

> +				dwc->phy_power_off = false;
> +			} else {
> +				dwc->phy_power_off = true;
> +				dwc3_core_exit(dwc);
> +			}
> +		}
>  		break;
>  	case DWC3_GCTL_PRTCAP_OTG:
>  		/* do nothing during runtime_suspend */
> @@ -1939,11 +1949,12 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
>  		break;
>  	case DWC3_GCTL_PRTCAP_HOST:
>  		if (!PMSG_IS_AUTO(msg)) {
> -			ret = dwc3_core_init_for_resume(dwc);
> -			if (ret)
> -				return ret;
> -			dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
> -			break;
> +			if (dwc->phy_power_off) {
> +				ret = dwc3_core_init_for_resume(dwc);
> +				if (ret)
> +					return ret;
> +				dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
> +			}
>  		}
>  		/* Restore GUSB2PHYCFG bits that were modified in suspend */
>  		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> @@ -2015,8 +2026,6 @@ static int dwc3_runtime_suspend(struct device *dev)
>  	if (ret)
>  		return ret;
>  
> -	device_init_wakeup(dev, true);
> -
>  	return 0;
>  }
>  
> @@ -2025,8 +2034,6 @@ static int dwc3_runtime_resume(struct device *dev)
>  	struct dwc3     *dwc = dev_get_drvdata(dev);
>  	int		ret;
>  
> -	device_init_wakeup(dev, false);
> -
>  	ret = dwc3_resume_common(dwc, PMSG_AUTO_RESUME);
>  	if (ret)
>  		return ret;
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 5c9d467..6a5845f 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -1154,6 +1154,9 @@ struct dwc3 {
>  
>  	bool			phys_ready;
>  
> +	unsigned int            hs_phy_mode;
> +	bool			phy_power_off;
> +
>  	struct ulpi		*ulpi;
>  	bool			ulpi_ready;
>  
> @@ -1537,6 +1540,7 @@ int dwc3_core_soft_reset(struct dwc3 *dwc);
>  #if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
>  int dwc3_host_init(struct dwc3 *dwc);
>  void dwc3_host_exit(struct dwc3 *dwc);
> +void dwc3_check_phy_speed_mode(struct dwc3 *dwc);
>  #else
>  static inline int dwc3_host_init(struct dwc3 *dwc)
>  { return 0; }
> diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
> index eda8719..7f22675 100644
> --- a/drivers/usb/dwc3/host.c
> +++ b/drivers/usb/dwc3/host.c
> @@ -13,6 +13,7 @@
>  #include <linux/platform_device.h>
>  
>  #include "core.h"
> +#include "../host/xhci.h"
>  
>  static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc,
>  					int irq, char *name)
> @@ -138,3 +139,27 @@ void dwc3_host_exit(struct dwc3 *dwc)
>  {
>  	platform_device_unregister(dwc->xhci);
>  }
> +
> +void dwc3_check_phy_speed_mode(struct dwc3 *dwc)
> +{
> +

delete empty line

> +	int i, num_ports;
> +	u32 reg;
> +	struct usb_hcd	*hcd = platform_get_drvdata(dwc->xhci);
> +	struct xhci_hcd	*xhci_hcd = hcd_to_xhci(hcd);
> +
> +	dwc->hs_phy_mode = 0;
> +
> +	reg = readl(&xhci_hcd->cap_regs->hcs_params1);
> +
> +	num_ports = HCS_MAX_PORTS(reg);
> +	for (i = 0; i < num_ports; i++) {
> +		reg = readl(&xhci_hcd->op_regs->port_status_base + i * NUM_PORT_REGS);
> +		if (reg & PORT_PE) {
> +			if (DEV_HIGHSPEED(reg) || DEV_FULLSPEED(reg))
> +				dwc->hs_phy_mode |= PHY_MODE_USB_HOST_HS;
> +			else if (DEV_LOWSPEED(reg))
> +				dwc->hs_phy_mode |= PHY_MODE_USB_HOST_LS;
> +		}
> +	}
> +}
> -- 
> 2.7.4
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux