[PATCH 0/4] PCI: qcom: Fix higher MSI vectors handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I have replied with my Tested-by to the commit 8ae0117418f3 ("PCI: qcom:
Add support for handling MSIs from 8 endpoints"). However lately I
noticed that during the tests I still had 'pcie_pme=nomsi', so the
device was not forced to use higher MSI vectors.

After removing this option I noticed that hight MSI vectors are not
delivered on tested platforms. After additional research I stumbled upon
a patch in msm-4.14 ([1]), which describes that each group of MSI
vectors is mapped to the separate interrupt. Implement corresponding
mapping.

[1] https://git.codelinaro.org/clo/la/kernel/msm-4.14/-/commit/671a3d5f129f4bfe477152292ada2194c8440d22

Dmitry Baryshkov (4):
  PCI: qcom: Handle MSI IRQs properly
  dt-bindings: pci: qcom: Document additional PCI MSI interrupts
  arm64: dts: qcom: sm8250: remove snps,dw-pcie compatibles
  arm64: dts: qcom: sm8250: provide additional MSI interrupts

 .../devicetree/bindings/pci/qcom,pcie.txt     |  4 +-
 arch/arm64/boot/dts/qcom/sm8250.dtsi          | 17 ++++--
 drivers/pci/controller/dwc/pci-dra7xx.c       |  2 +-
 drivers/pci/controller/dwc/pci-exynos.c       |  2 +-
 .../pci/controller/dwc/pcie-designware-host.c | 54 ++++++++++++++-----
 drivers/pci/controller/dwc/pcie-designware.h  |  3 +-
 drivers/pci/controller/dwc/pcie-keembay.c     |  2 +-
 drivers/pci/controller/dwc/pcie-qcom.c        |  1 +
 drivers/pci/controller/dwc/pcie-spear13xx.c   |  2 +-
 drivers/pci/controller/dwc/pcie-tegra194.c    |  2 +-
 10 files changed, 65 insertions(+), 24 deletions(-)

-- 
2.35.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux