On Fri, Apr 08, 2022 at 03:59:24PM +0200, Daniele Palmas wrote:
> Add Telit FN980 v1 hardware revision:
>
> 01:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:0306]
> Subsystem: Device [1c5d:2000]
>
> Signed-off-by: Daniele Palmas <dnlplm@xxxxxxxxx>
> ---
> drivers/bus/mhi/host/pci_generic.c | 38 ++++++++++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
>
> diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
> index 9527b7d63840..5e786f4a3bdf 100644
> --- a/drivers/bus/mhi/host/pci_generic.c
> +++ b/drivers/bus/mhi/host/pci_generic.c
> @@ -446,7 +446,45 @@ static const struct mhi_pci_dev_info mhi_sierra_em919x_info = {
> .sideband_wake = false,
> };
>
> +static const struct mhi_channel_config mhi_telit_fn980_hw_v1_channels[] = {
> + MHI_CHANNEL_CONFIG_UL(14, "QMI", 32, 0),
> + MHI_CHANNEL_CONFIG_DL(15, "QMI", 32, 0),
> + MHI_CHANNEL_CONFIG_UL(20, "IPCR", 16, 0),
> + MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(21, "IPCR", 16, 0),
> + MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 1),
> + MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 128, 2),
> +};
> +
> +static struct mhi_event_config mhi_telit_fn980_hw_v1_events[] = {
> + MHI_EVENT_CONFIG_CTRL(0, 128),
> + MHI_EVENT_CONFIG_HW_DATA(1, 1024, 100),
> + MHI_EVENT_CONFIG_HW_DATA(2, 2048, 101)
> +};
> +
> +static struct mhi_controller_config modem_telit_fn980_hw_v1_config = {
> + .max_channels = 128,
> + .timeout_ms = 20000,
> + .num_channels = ARRAY_SIZE(mhi_telit_fn980_hw_v1_channels),
> + .ch_cfg = mhi_telit_fn980_hw_v1_channels,
> + .num_events = ARRAY_SIZE(mhi_telit_fn980_hw_v1_events),
> + .event_cfg = mhi_telit_fn980_hw_v1_events,
> +};
> +
> +static const struct mhi_pci_dev_info mhi_telit_fn980_hw_v1_info = {
> + .name = "telit-fn980-hwv1",
> + .fw = "qcom/sdx55m/sbl1.mbn",
> + .edl = "qcom/sdx55m/edl.mbn",
> + .config = &modem_telit_fn980_hw_v1_config,
> + .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> + .dma_data_width = 32,
> + .mru_default = 32768,
> + .sideband_wake = false,
> +};
> +
> static const struct pci_device_id mhi_pci_id_table[] = {
> + /* Telit FN980 hardware revision v1 */
> + { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x1C5D, 0x2000),
> + .driver_data = (kernel_ulong_t) &mhi_telit_fn980_hw_v1_info },
Please rebase this patch on top of my recent patch that sorts the table [1].
Thanks,
Mani
[1] https://lore.kernel.org/mhi/20220411054831.16344-1-manivannan.sadhasivam@xxxxxxxxxx/T/#u
> /* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */
> { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x18d7, 0x0200),
> .driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info },
> --
> 2.32.0
>
>
