[PATCH V9 0/6] Add Qualcomm Technologies, Inc. PM8008 regulator driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Satya Priya (6):
  dt-bindings: mfd: pm8008: Add reset-gpios
  dt-bindings: mfd: pm8008: Add pm8008 regulator bindings
  mfd: pm8008: Add mfd cell struct to register LDOs
  regulator: Add a regulator driver for the PM8008 PMIC
  arm64: dts: qcom: pm8008: Add base dts file
  arm64: dts: qcom: sc7280: Add pm8008 support for sc7280-idp

 .../bindings/mfd/qcom,pm8008-regulators.yaml       |  84 +++++++++
 .../devicetree/bindings/mfd/qcom,pm8008.yaml       |   7 +
 arch/arm64/boot/dts/qcom/pm8008.dtsi               |  47 +++++
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi           |  68 +++++++
 drivers/mfd/qcom-pm8008.c                          |  80 +++++++-
 drivers/regulator/Kconfig                          |   9 +
 drivers/regulator/Makefile                         |   1 +
 drivers/regulator/qcom-pm8008-regulator.c          | 205 +++++++++++++++++++++
 8 files changed, 499 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/qcom,pm8008-regulators.yaml
 create mode 100644 arch/arm64/boot/dts/qcom/pm8008.dtsi
 create mode 100644 drivers/regulator/qcom-pm8008-regulator.c

-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux