Hi Greg, Here is the series for adding the initial support for the MHI bus implementation in Endpoint devices (EP) like PCIe based SDX55 modems from Qualcomm. This MHI EP stack runs on the modem itself and communicates with the host MHI stack [1] over a physical bus like PCIe. The usecase of this stack is to carry the data packets from modem DSP to provide data connectivity to the host machine. All these patches were submitted to mhi-list previously and reviewed by the developers from Linaro and Qualcomm. Please find the summary below: --- This series adds initial support for the Qualcomm specific Modem Host Interface (MHI) bus in endpoint devices like SDX55 modems. The MHI bus in endpoint devices communicates with the MHI bus in host machines like x86 over any physical bus like PCIe. The MHI host support is already in mainline [1] and been used to get data connectivity from PCIe based modems and WLAN devices running vendor code (downstream). This effort is to upstream the software stack that runs on the modem itself. Overview ======== This series aims at adding the MHI support in the endpoint devices with the goal of getting data connectivity using the mainline kernel running on the modems. Modems here refer to the combination of an APPS processor (Cortex A grade) and a baseband processor (DSP). The MHI bus is located in the APPS processor and it transfers data packets from the baseband processor to the host machine. The MHI Endpoint (MHI EP) stack proposed here is inspired by the downstream code written by Qualcomm. But the complete stack is mostly re-written to adapt to the "bus" framework and made it modular so that it can work with the upstream subsystems like "PCI Endpoint". The code structure of the MHI endpoint stack follows the MHI host stack to maintain uniformity. With this initial MHI EP stack (along with few other drivers), we can establish the network interface between host and endpoint over the MHI software channels (IP_SW0) and can do things like IP forwarding, SSH, etc... Stack Organization ================== The MHI EP stack has the concept of controller and device drivers as like the MHI host stack. The MHI EP controller driver can be a PCI Endpoint Function driver and the MHI device driver can be a MHI EP Networking driver or QRTR driver. The MHI EP controller driver is tied to the PCI Endpoint subsystem and handles all bus related activities like mapping the host memory, raising IRQ, passing link specific events etc... The MHI EP networking driver is tied to the Networking stack and handles all networking related activities like sending/receiving the SKBs from netdev, statistics collection etc... This series only contains the MHI EP code, whereas the PCIe EPF driver and MHI EP Networking drivers are not yet submitted and can be found here [2]. Though the MHI EP stack doesn't have the build time dependency, it cannot function without them. Test setup ========== This series has been tested on Telit FN980 TLB board powered by Qualcomm SDX55 (a.k.a X55 modem) and Qualcomm SM8450 based dev board. For testing the stability and performance, networking tools such as iperf, ssh and ping are used. Limitations =========== We are not _yet_ there to get the data packets from the modem as that involves the Qualcomm IP Accelerator (IPA) integration with MHI endpoint stack. But we are planning to add support for it in the coming days. References ========== MHI bus: https://www.kernel.org/doc/html/latest/mhi/mhi.html Linaro connect presentation around this topic: https://connect.linaro.org/resources/lvc21f/lvc21f-222/ Thanks, Mani [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/bus/mhi [2] https://git.linaro.org/landing-teams/working/qualcomm/kernel.git/log/?h=tracking-qcomlt-sdx55-drivers Manivannan Sadhasivam (18): bus: mhi: ep: Add support for registering MHI endpoint controllers bus: mhi: ep: Add support for registering MHI endpoint client drivers bus: mhi: ep: Add support for creating and destroying MHI EP devices bus: mhi: ep: Add support for managing MMIO registers bus: mhi: ep: Add support for ring management bus: mhi: ep: Add support for sending events to the host bus: mhi: ep: Add support for managing MHI state machine bus: mhi: ep: Add support for processing MHI endpoint interrupts bus: mhi: ep: Add support for powering up the MHI endpoint stack bus: mhi: ep: Add support for powering down the MHI endpoint stack bus: mhi: ep: Add support for handling MHI_RESET bus: mhi: ep: Add support for handling SYS_ERR condition bus: mhi: ep: Add support for processing command rings bus: mhi: ep: Add support for reading from the host bus: mhi: ep: Add support for processing channel rings bus: mhi: ep: Add support for queueing SKBs to the host bus: mhi: ep: Add support for suspending and resuming channels bus: mhi: ep: Add uevent support for module autoloading drivers/bus/mhi/Kconfig | 1 + drivers/bus/mhi/Makefile | 3 + drivers/bus/mhi/common.h | 22 + drivers/bus/mhi/ep/Kconfig | 10 + drivers/bus/mhi/ep/Makefile | 2 + drivers/bus/mhi/ep/internal.h | 218 +++++ drivers/bus/mhi/ep/main.c | 1591 +++++++++++++++++++++++++++++++ drivers/bus/mhi/ep/mmio.c | 273 ++++++ drivers/bus/mhi/ep/ring.c | 207 ++++ drivers/bus/mhi/ep/sm.c | 148 +++ include/linux/mhi_ep.h | 277 ++++++ include/linux/mod_devicetable.h | 2 + scripts/mod/file2alias.c | 10 + 13 files changed, 2764 insertions(+) create mode 100644 drivers/bus/mhi/ep/Kconfig create mode 100644 drivers/bus/mhi/ep/Makefile create mode 100644 drivers/bus/mhi/ep/internal.h create mode 100644 drivers/bus/mhi/ep/main.c create mode 100644 drivers/bus/mhi/ep/mmio.c create mode 100644 drivers/bus/mhi/ep/ring.c create mode 100644 drivers/bus/mhi/ep/sm.c create mode 100644 include/linux/mhi_ep.h -- 2.25.1
