[PATCH v6 2/2] arm64: dts: qcom: sc7280: add lpass lpi pin controller node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add LPASS LPI pinctrl node required for Audio functionality on sc7280
based platforms.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi |  98 ++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280.dtsi     | 107 +++++++++++++++++++++++++++++++
 2 files changed, 205 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 2afbbe3..f912a89 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -238,6 +238,104 @@
 	modem-init;
 };
 
+&lpass_tlmm {
+	dmic01_active: dmic01-active {
+		clk {
+			drive-strength = <8>;
+		};
+
+		data {
+			drive-strength = <8>;
+		};
+	};
+
+	dmic01_sleep: dmic01-sleep {
+		clk {
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		data {
+			drive-strength = <2>;
+			pull-down;
+		};
+	};
+
+	dmic23_active: dmic02-active {
+		clk {
+			drive-strength = <8>;
+		};
+
+		data {
+			drive-strength = <8>;
+		};
+	};
+
+	dmic23_sleep: dmic02-sleep {
+		clk {
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		data {
+			drive-strength = <2>;
+			pull-down;
+		};
+	};
+
+	rx_swr_active: rx-swr-active {
+		clk {
+			drive-strength = <2>;
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		data {
+			drive-strength = <2>;
+			slew-rate = <1>;
+			bias-bus-hold;
+		};
+	};
+
+	rx_swr_sleep: rx-swr-sleep {
+		clk {
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		data {
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	tx_swr_active: tx-swr-active {
+		clk {
+			drive-strength = <2>;
+			slew-rate = <1>;
+			bias-disable;
+		};
+
+		data {
+			drive-strength = <2>;
+			slew-rate = <1>;
+			bias-bus-hold;
+		};
+	};
+
+	tx_swr_sleep: tx-swr-sleep {
+		clk {
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		data {
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+	};
+};
+
 &pcie1 {
 	status = "okay";
 	perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 8d8cec5..db74fc3 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -1987,6 +1987,113 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		lpass_tlmm: pinctrl@33c0000 {
+			compatible = "qcom,sc7280-lpass-lpi-pinctrl";
+			reg = <0 0x33c0000 0x0 0x20000>,
+				<0 0x3550000 0x0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 15>;
+
+			#clock-cells = <1>;
+
+			dmic01_active: dmic01-active {
+				clk {
+					pins = "gpio6";
+					function = "dmic1_clk";
+				};
+
+				data {
+					pins = "gpio7";
+					function = "dmic1_data";
+				};
+			};
+
+			dmic01_sleep: dmic01-sleep {
+				clk {
+					pins = "gpio6";
+					function = "dmic1_clk";
+				};
+
+				data {
+					pins = "gpio7";
+					function = "dmic1_data";
+				};
+			};
+
+			dmic23_active: dmic02-active {
+				clk {
+					pins = "gpio8";
+					function = "dmic2_clk";
+				};
+
+				data {
+					pins = "gpio9";
+					function = "dmic2_data";
+				};
+			};
+
+			dmic23_sleep: dmic02-sleep {
+				clk {
+					pins = "gpio8";
+					function = "dmic2_clk";
+				};
+
+				data {
+					pins = "gpio9";
+					function = "dmic2_data";
+				};
+			};
+
+			rx_swr_active: rx-swr-active {
+				clk {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+				};
+
+				data {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+				};
+			};
+
+			rx_swr_sleep: rx-swr-sleep {
+				clk {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+				};
+
+				data {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+				};
+			};
+
+			tx_swr_active: tx-swr-active {
+				clk {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+				};
+
+				data {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+				};
+			};
+
+			tx_swr_sleep: tx-swr-sleep {
+				clk {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+				};
+
+				data {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+				};
+			};
+		};
+
 		gpu: gpu@3d00000 {
 			compatible = "qcom,adreno-635.0", "qcom,adreno";
 			reg = <0 0x03d00000 0 0x40000>,
-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux