Re: [PATCH v2] clk: qcom: rcg2: Cache CFG register updates for parked RCGs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Bjorn Andersson (2022-03-07 20:03:48)
> As GDSCs are turned on and off some associated clocks are momentarily
> enabled for house keeping purposes. For this, and similar, purposes the
> "shared RCGs" will park the RCG on a source clock which is known to be
> available.
> When the RCG is parked, a safe clock source will be selected and
> committed, then the original source would be written back and upon enable
> the change back to the unparked source would be committed.
> 
> But starting with SM8350 this fails, as the value in CFG is committed by
> the GDSC handshake and without a valid parent the GDSC enablement will
> fail.
> 
> To avoid this problem, the software needs to cache the CFG register
> content while the shared RCG is parked.
> 
> Writes to M, N and D registers are committed as they are requested. New
> helpers for get_parent() and recalc_rate() are extracted from their
> previous implementations and __clk_rcg2_configure() is modified to allow
> it to operate on the cached value.
> 
> Fixes: 7ef6f11887bd ("clk: qcom: Configure the RCGs to a safe source as needed")
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---

Sorry I've been delaying reviewing this patch. I'll review it in the
next couple days.




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux