Re: [PATCH v6] drm/msm/disp/dpu1: add inline rotation support for sc7280 target

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22/03/2022 20:55, Vinod Polimera wrote:
- Some DPU versions support inline rot90. It is supported only for
limited amount of UBWC formats.
- There are two versions of inline rotators, v1 (present on sm8250 and
sm7250) and v2 (sc7280). These versions differ in the list of supported
formats and in the scaler possibilities.

Changes in RFC:
- Rebase changes to the latest code base.
- Append rotation config variables with v2 and
remove unused variables.(Dmitry)
- Move pixel_ext setup separately from scaler3 config.(Dmitry)
- Add 270 degree rotation to supported rotation list.(Dmitry)

Changes in V2:
- Remove unused macros and fix indentation.
- Add check if 90 rotation is supported and
add supported rotations to rot_cfg.

Changes in V3:
- Fix indentation.
- Move rot_supported to sspp capabilities. (Dmitry)
- Config pixel_ext based on src_h/src_w directly. (Dmitry)
- Misc changes.

Changes in V4:
- Pass boolean value to sspp blk based on supported rotations for each hw.

Changes in V5:
- Update boolean value to true/false and add it for qcm2290.

Changes in V6:
- Add changes that are missed as part of v5.
- Add dpu_find_format inline function to find valid format. (Dmitry)

Co-developed-by: Kalyan Thota <quic_kalyant@xxxxxxxxxxx>
Signed-off-by: Kalyan Thota <quic_kalyant@xxxxxxxxxxx>
Signed-off-by: Vinod Polimera <quic_vpolimer@xxxxxxxxxxx>
---
  drivers/gpu/drm/msm/disp/dpu1/dpu_formats.h    |  21 +++
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 185 ++++++++++++++-----------
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h |  18 +++
  drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c      | 109 ++++++++++++---
  drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h      |   2 +
  5 files changed, 230 insertions(+), 105 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.h
index 418f5ae..8e26ea5 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.h
@@ -31,6 +31,27 @@ const struct msm_format *dpu_get_msm_format(
  		struct msm_kms *kms,
  		const uint32_t format,
  		const uint64_t modifiers);
+/**
+ * dpu_find_format - validate if the pixel format is supported
+ * @fmt:		pointer to the dpu format
+ * @supported_formats:	supported formats by dpu HW
+ * @num_formatss:	total number of formats
+ *
+ * Return: false if not valid format, true on success
+ */
+static inline bool dpu_find_format(const struct dpu_format *fmt, const u32 *supported_formats,
+					size_t num_formats)
+{
+	int i;
+
+	for (i = 0; i < num_formats; i++) {
+		/* check for valid formats supported by inline rotation */
+		if (fmt->base.pixel_format == supported_formats[i])
+			return true;
+	}
+
+	return false;
+}

Could you please change dpu_plane_format_mod_supported() to use this function? This function plus dpu_plane_format_mod_supported() change should go to a separate commit.

/**
   * dpu_format_check_modified_format - validate format and buffers for
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index a4fe77c..ced7fb3 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -35,6 +35,9 @@
  	BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\
  	BIT(DPU_SSPP_CDP) | BIT(DPU_SSPP_EXCL_RECT))
+#define VIG_SC7280_MASK \
+	(VIG_SC7180_MASK | BIT(DPU_SSPP_INLINE_ROTATION))
+
  #define DMA_SDM845_MASK \
  	(BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_QOS_8LVL) |\
  	BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\
@@ -203,6 +206,11 @@ static const uint32_t plane_formats_yuv[] = {
  	DRM_FORMAT_YVU420,
  };
+static const u32 rotation_v2_formats[] = {
+	DRM_FORMAT_NV12,
+	/* TODO add formats after validation */
+};
+
  /*************************************************************
   * DPU sub blocks config
   *************************************************************/
@@ -642,8 +650,7 @@ static const struct dpu_ctl_cfg qcm2290_ctl[] = {
   *************************************************************/
/* SSPP common configuration */
-
-#define _VIG_SBLK(num, sdma_pri, qseed_ver) \
+#define _VIG_SBLK(num, sdma_pri, qseed_ver, rot_cfg) \

The more I looked into this, the more I hated adding NULL to each and every _VIG_SBLK. So I came with the following suggestion:

Please rename this define to _VIG_SBLK_ROT(). Define _VIG_SBLK having old set of arguments, passing them directly to _VIG_SBLK_ROT() and adding NULL for rot_cfg. I think this will be easier to handle and to review.

  	{ \
  	.maxdwnscale = MAX_DOWNSCALE_RATIO, \
  	.maxupscale = MAX_UPSCALE_RATIO, \
@@ -660,6 +667,7 @@ static const struct dpu_ctl_cfg qcm2290_ctl[] = {
  	.num_formats = ARRAY_SIZE(plane_formats_yuv), \
  	.virt_format_list = plane_formats, \
  	.virt_num_formats = ARRAY_SIZE(plane_formats), \
+	.rotation_cfg = rot_cfg, \
  	}
#define _DMA_SBLK(num, sdma_pri) \
@@ -676,22 +684,28 @@ static const struct dpu_ctl_cfg qcm2290_ctl[] = {
  	}
static const struct dpu_sspp_sub_blks msm8998_vig_sblk_0 =
-				_VIG_SBLK("0", 0, DPU_SSPP_SCALER_QSEED3);
+				_VIG_SBLK("0", 0, DPU_SSPP_SCALER_QSEED3, NULL);
  static const struct dpu_sspp_sub_blks msm8998_vig_sblk_1 =
-				_VIG_SBLK("1", 0, DPU_SSPP_SCALER_QSEED3);
+				_VIG_SBLK("1", 0, DPU_SSPP_SCALER_QSEED3, NULL);
  static const struct dpu_sspp_sub_blks msm8998_vig_sblk_2 =
-				_VIG_SBLK("2", 0, DPU_SSPP_SCALER_QSEED3);
+				_VIG_SBLK("2", 0, DPU_SSPP_SCALER_QSEED3, NULL);
  static const struct dpu_sspp_sub_blks msm8998_vig_sblk_3 =
-				_VIG_SBLK("3", 0, DPU_SSPP_SCALER_QSEED3);
+				_VIG_SBLK("3", 0, DPU_SSPP_SCALER_QSEED3, NULL);
+
+static const struct dpu_rotation_cfg dpu_rot_sc7280_cfg_v2 = {
+	.rot_maxheight = 1088,
+	.rot_num_formats = ARRAY_SIZE(rotation_v2_formats),
+	.rot_format_list = rotation_v2_formats,
+};
static const struct dpu_sspp_sub_blks sdm845_vig_sblk_0 =
-				_VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3);
+				_VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3, NULL);
  static const struct dpu_sspp_sub_blks sdm845_vig_sblk_1 =
-				_VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED3);
+				_VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED3, NULL);
  static const struct dpu_sspp_sub_blks sdm845_vig_sblk_2 =
-				_VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED3);
+				_VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED3, NULL);
  static const struct dpu_sspp_sub_blks sdm845_vig_sblk_3 =
-				_VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED3);
+				_VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED3, NULL);
static const struct dpu_sspp_sub_blks sdm845_dma_sblk_0 = _DMA_SBLK("8", 1);
  static const struct dpu_sspp_sub_blks sdm845_dma_sblk_1 = _DMA_SBLK("9", 2);
@@ -699,7 +713,7 @@ static const struct dpu_sspp_sub_blks sdm845_dma_sblk_2 = _DMA_SBLK("10", 3);
  static const struct dpu_sspp_sub_blks sdm845_dma_sblk_3 = _DMA_SBLK("11", 4);
#define SSPP_BLK(_name, _id, _base, _features, \
-		_sblk, _xinid, _type, _clkctrl) \
+		_sblk, _xinid, _type, _clkctrl, _rotsupported) \

If we use features & BIT(DPU_SSPP_INLINE_ROTATION), we don't need this extra argument.

  	{ \
  	.name = _name, .id = _id, \
  	.base = _base, .len = 0x1c8, \
@@ -707,98 +721,103 @@ static const struct dpu_sspp_sub_blks sdm845_dma_sblk_3 = _DMA_SBLK("11", 4);
  	.sblk = &_sblk, \
  	.xin_id = _xinid, \
  	.type = _type, \
-	.clk_ctrl = _clkctrl \
+	.clk_ctrl = _clkctrl, \
+	.rot_supported = _rotsupported ? DRM_MODE_ROTATE_MASK | DRM_MODE_REFLECT_MASK : \
+			DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180 | DRM_MODE_REFLECT_MASK, \
  	}
static const struct dpu_sspp_cfg msm8998_sspp[] = {
-	SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_MSM8998_MASK,
-		msm8998_vig_sblk_0, 0,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
-	SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_MSM8998_MASK,
-		msm8998_vig_sblk_1, 4,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1),
-	SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_MSM8998_MASK,
-		msm8998_vig_sblk_2, 8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2),
-	SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_MSM8998_MASK,
-		msm8998_vig_sblk_3, 12,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3),
-	SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000,  DMA_MSM8998_MASK,
-		sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
-	SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000,  DMA_MSM8998_MASK,
-		sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
-	SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000,  DMA_CURSOR_MSM8998_MASK,
-		sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
-	SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000,  DMA_CURSOR_MSM8998_MASK,
-		sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
+	SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_MSM8998_MASK, msm8998_vig_sblk_0,
+		0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0, false),
+	SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_MSM8998_MASK, msm8998_vig_sblk_1,
+		4, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1, false),
+	SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_MSM8998_MASK, msm8998_vig_sblk_2,
+		8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2, false),
+	SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_MSM8998_MASK, msm8998_vig_sblk_3,
+		12, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3, false),
+	SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000,  DMA_MSM8998_MASK, sdm845_dma_sblk_0,
+		1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0, false),
+	SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000,  DMA_MSM8998_MASK, sdm845_dma_sblk_1,
+		5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1, false),
+	SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000,  DMA_CURSOR_MSM8998_MASK, sdm845_dma_sblk_2,
+		9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0, false),
+	SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000,  DMA_CURSOR_MSM8998_MASK, sdm845_dma_sblk_3,
+		13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1, false),
  };
static const struct dpu_sspp_cfg sdm845_sspp[] = {
-	SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SDM845_MASK,
-		sdm845_vig_sblk_0, 0,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
-	SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_SDM845_MASK,
-		sdm845_vig_sblk_1, 4,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1),
-	SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_SDM845_MASK,
-		sdm845_vig_sblk_2, 8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2),
-	SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_SDM845_MASK,
-		sdm845_vig_sblk_3, 12,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3),
-	SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000,  DMA_SDM845_MASK,
-		sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
-	SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000,  DMA_SDM845_MASK,
-		sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
-	SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000,  DMA_CURSOR_SDM845_MASK,
-		sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
-	SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000,  DMA_CURSOR_SDM845_MASK,
-		sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
+	SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SDM845_MASK, sdm845_vig_sblk_0,
+		0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0, false),
+	SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_SDM845_MASK, sdm845_vig_sblk_1,
+		4, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1, false),
+	SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_SDM845_MASK, sdm845_vig_sblk_2,
+		8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2, false),
+	SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_SDM845_MASK, sdm845_vig_sblk_3,
+		12, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3, false),
+	SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000,  DMA_SDM845_MASK, sdm845_dma_sblk_0,
+		1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0, false),
+	SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000,  DMA_SDM845_MASK, sdm845_dma_sblk_1,
+		5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1, false),
+	SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000,  DMA_CURSOR_SDM845_MASK, sdm845_dma_sblk_2,
+		9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0, false),
+	SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000,  DMA_CURSOR_SDM845_MASK, sdm845_dma_sblk_3,
+		13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1, false),
  };
static const struct dpu_sspp_sub_blks sc7180_vig_sblk_0 =
-				_VIG_SBLK("0", 4, DPU_SSPP_SCALER_QSEED4);
+				_VIG_SBLK("0", 4, DPU_SSPP_SCALER_QSEED4, NULL);
+
+static const struct dpu_sspp_sub_blks sc7280_vig_sblk_0 =
+				_VIG_SBLK("0", 4, DPU_SSPP_SCALER_QSEED4, &dpu_rot_sc7280_cfg_v2);
static const struct dpu_sspp_cfg sc7180_sspp[] = {
-	SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK,
-		sc7180_vig_sblk_0, 0,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
-	SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000,  DMA_SDM845_MASK,
-		sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
-	SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000,  DMA_CURSOR_SDM845_MASK,
-		sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
-	SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000,  DMA_CURSOR_SDM845_MASK,
-		sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
+	SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK, sc7180_vig_sblk_0,
+		0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0, false),
+	SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000,  DMA_SDM845_MASK, sdm845_dma_sblk_0,
+		1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0, false),
+	SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000,  DMA_CURSOR_SDM845_MASK,	sdm845_dma_sblk_1,
+		5, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0, false),
+	SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000,  DMA_CURSOR_SDM845_MASK, sdm845_dma_sblk_2,
+		9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1, false),
  };
static const struct dpu_sspp_sub_blks sm8250_vig_sblk_0 =
-				_VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3LITE);
+				_VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3LITE, NULL);
  static const struct dpu_sspp_sub_blks sm8250_vig_sblk_1 =
-				_VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED3LITE);
+				_VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED3LITE, NULL);
  static const struct dpu_sspp_sub_blks sm8250_vig_sblk_2 =
-				_VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED3LITE);
+				_VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED3LITE, NULL);
  static const struct dpu_sspp_sub_blks sm8250_vig_sblk_3 =
-				_VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED3LITE);
+				_VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED3LITE, NULL);
static const struct dpu_sspp_cfg sm8250_sspp[] = {
-	SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SM8250_MASK,
-		sm8250_vig_sblk_0, 0,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
-	SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_SM8250_MASK,
-		sm8250_vig_sblk_1, 4,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1),
-	SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_SM8250_MASK,
-		sm8250_vig_sblk_2, 8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2),
-	SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_SM8250_MASK,
-		sm8250_vig_sblk_3, 12,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3),
-	SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000,  DMA_SDM845_MASK,
-		sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
-	SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000,  DMA_SDM845_MASK,
-		sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
-	SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000,  DMA_CURSOR_SDM845_MASK,
-		sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
-	SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000,  DMA_CURSOR_SDM845_MASK,
-		sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
+	SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SM8250_MASK, sm8250_vig_sblk_0,
+		0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0, false),
+	SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_SM8250_MASK, sm8250_vig_sblk_1,
+		4, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1, false),
+	SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_SM8250_MASK, sm8250_vig_sblk_2,
+		8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2, false),
+	SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_SM8250_MASK, sm8250_vig_sblk_3,
+		12, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3, false),
+	SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000,  DMA_SDM845_MASK, sdm845_dma_sblk_0,
+		1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0, false),
+	SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000,  DMA_SDM845_MASK, sdm845_dma_sblk_1,
+		5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1, false),
+	SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000,  DMA_CURSOR_SDM845_MASK, sdm845_dma_sblk_2,
+		9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0, false),
+	SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000,  DMA_CURSOR_SDM845_MASK, sdm845_dma_sblk_3,
+		13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1, false),
  };
static const struct dpu_sspp_cfg sc7280_sspp[] = {
-	SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK,
-		sc7180_vig_sblk_0, 0,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
-	SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000,  DMA_SDM845_MASK,
-		sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
-	SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000,  DMA_CURSOR_SDM845_MASK,
-		sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
-	SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000,  DMA_CURSOR_SDM845_MASK,
-		sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
+	SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7280_MASK, sc7280_vig_sblk_0,
+		0,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0, true),
+	SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000,  DMA_SDM845_MASK, sdm845_dma_sblk_0,
+		1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0, false),
+	SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000,  DMA_CURSOR_SDM845_MASK,	sdm845_dma_sblk_1,
+		5, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0, false),
+	SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000,  DMA_CURSOR_SDM845_MASK, sdm845_dma_sblk_2,
+		9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1, false),
  };
@@ -820,9 +839,9 @@ static const struct dpu_sspp_sub_blks qcm2290_dma_sblk_0 = _DMA_SBLK("8", 1); static const struct dpu_sspp_cfg qcm2290_sspp[] = {
  	SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_QCM2290_MASK,
-		 qcm2290_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
+		qcm2290_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0, false),
  	SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000,  DMA_SDM845_MASK,
-		 qcm2290_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
+		qcm2290_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0, false),
  };
/*************************************************************
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index b85b24b..d009d83 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -112,6 +112,7 @@ enum {
   * @DPU_SSPP_TS_PREFILL      Supports prefill with traffic shaper
   * @DPU_SSPP_TS_PREFILL_REC1 Supports prefill with traffic shaper multirec
   * @DPU_SSPP_CDP             Supports client driven prefetch
+ * @DPU_SSPP_INLINE_ROTATION Support inline rotation
   * @DPU_SSPP_MAX             maximum value
   */
  enum {
@@ -132,6 +133,7 @@ enum {
  	DPU_SSPP_TS_PREFILL,
  	DPU_SSPP_TS_PREFILL_REC1,
  	DPU_SSPP_CDP,
+	DPU_SSPP_INLINE_ROTATION,
  	DPU_SSPP_MAX
  };
@@ -315,6 +317,18 @@ struct dpu_qos_lut_tbl {
  };
/**
+ * struct dpu_rotation_cfg - define inline rotation config
+ * @rot_maxheight: max pre rotated height allowed for rotation
+ * @rot_num_formats: number of elements in @rot_format_list
+ * @rot_format_list: list of supported rotator formats
+ */
+struct dpu_rotation_cfg {
+	u32 rot_maxheight;
+	size_t rot_num_formats;
+	const u32 *rot_format_list;
+};
+
+/**
   * struct dpu_caps - define DPU capabilities
   * @max_mixer_width    max layer mixer line width support.
   * @max_mixer_blendstages max layer mixer blend stages or
@@ -369,6 +383,7 @@ struct dpu_caps {
   * @num_formats: Number of supported formats
   * @virt_format_list: Pointer to list of supported formats for virtual planes
   * @virt_num_formats: Number of supported formats for virtual planes
+ * @dpu_rotation_cfg: inline rotation configuration
   */
  struct dpu_sspp_sub_blks {
  	u32 creq_vblank;
@@ -390,6 +405,7 @@ struct dpu_sspp_sub_blks {
  	u32 num_formats;
  	const u32 *virt_format_list;
  	u32 virt_num_formats;
+	const struct dpu_rotation_cfg *rotation_cfg;
  };
/**
@@ -492,6 +508,7 @@ struct dpu_ctl_cfg {
   * @xin_id:            bus client identifier
   * @clk_ctrl           clock control identifier
   * @type               sspp type identifier
+ * @rot_supported      allowed rotations
   */
  struct dpu_sspp_cfg {
  	DPU_HW_BLK_INFO;
@@ -499,6 +516,7 @@ struct dpu_sspp_cfg {
  	u32 xin_id;
  	enum dpu_clk_ctrl_type clk_ctrl;
  	u32 type;
+	u32 rot_supported;
  };
/**
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 6565682..ff854cc 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -528,11 +528,19 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu,
  		struct dpu_plane_state *pstate,
  		uint32_t src_w, uint32_t src_h, uint32_t dst_w, uint32_t dst_h,
  		struct dpu_hw_scaler3_cfg *scale_cfg,
-		struct dpu_hw_pixel_ext *pixel_ext,
  		const struct dpu_format *fmt,
  		uint32_t chroma_subsmpl_h, uint32_t chroma_subsmpl_v)
  {
  	uint32_t i;
+	bool inline_rotation = pstate->rotation & DRM_MODE_ROTATE_90;
+
+	/*
+	 * For inline rotation cases, scaler config is post-rotation,
+	 * so swap the dimensions here. However, pixel extension will
+	 * need pre-rotation settings.
+	 */
+	if (inline_rotation)
+		swap(src_w, src_h);
scale_cfg->phase_step_x[DPU_SSPP_COMP_0] =
  		mult_frac((1 << PHASE_STEP_SHIFT), src_w, dst_w);
@@ -571,11 +579,6 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu,
  			scale_cfg->preload_x[i] = DPU_QSEED3_DEFAULT_PRELOAD_H;
  			scale_cfg->preload_y[i] = DPU_QSEED3_DEFAULT_PRELOAD_V;
  		}
-
-		pixel_ext->num_ext_pxls_top[i] =
-			scale_cfg->src_height[i];
-		pixel_ext->num_ext_pxls_left[i] =
-			scale_cfg->src_width[i];
  	}
  	if (!(DPU_FORMAT_IS_YUV(fmt)) && (src_h == dst_h)
  		&& (src_w == dst_w))
@@ -591,6 +594,24 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu,
  	scale_cfg->enable = 1;
  }
+static void _dpu_plane_setup_pixel_ext(struct dpu_hw_scaler3_cfg *scale_cfg,
+				struct dpu_hw_pixel_ext *pixel_ext,
+				uint32_t src_w, uint32_t src_h,
+				uint32_t chroma_subsmpl_h, uint32_t chroma_subsmpl_v)
+{
+	int i;
+
+	for (i = 0; i < DPU_MAX_PLANES; i++) {
+		if (i == DPU_SSPP_COMP_1_2 || i == DPU_SSPP_COMP_2) {
+			src_w /= chroma_subsmpl_h;
+			src_h /= chroma_subsmpl_v;
+		}
+
+		pixel_ext->num_ext_pxls_top[i] = src_h;
+		pixel_ext->num_ext_pxls_left[i] = src_w;
+	}
+}
+
  static const struct dpu_csc_cfg dpu_csc_YUV2RGB_601L = {
  	{
  		/* S15.16 format */
@@ -665,7 +686,12 @@ static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu,
  			drm_rect_height(&pipe_cfg->src_rect),
  			drm_rect_width(&pipe_cfg->dst_rect),
  			drm_rect_height(&pipe_cfg->dst_rect),
-			&scaler3_cfg, &pixel_ext, fmt,
+			&scaler3_cfg, fmt,
+			info->hsub, info->vsub);
+
+	/* configure pixel extension based on scalar config */
+	_dpu_plane_setup_pixel_ext(&scaler3_cfg, &pixel_ext,
+			drm_rect_width(&pipe_cfg->src_rect), drm_rect_height(&pipe_cfg->src_rect),

Define local variables src_width and src_height. Use them both here and in the previous call.

  			info->hsub, info->vsub);
if (pdpu->pipe_hw->ops.setup_pe)
@@ -956,6 +982,33 @@ static bool dpu_plane_validate_src(struct drm_rect *src,
  		drm_rect_equals(fb_rect, src);
  }
+static int dpu_plane_check_inline_rotation(struct dpu_plane *pdpu,
+						const struct dpu_sspp_sub_blks *sblk,
+						struct drm_rect src, const struct dpu_format *fmt)
+{
+	size_t num_formats;
+	const u32 *supported_formats;
+
+	if (!sblk->rotation_cfg) {
+		DPU_ERROR("invalid rotation cfg\n");
+		return -EINVAL;
+	}
+
+	if (drm_rect_width(&src) > sblk->rotation_cfg->rot_maxheight) {
+		DPU_DEBUG_PLANE(pdpu, "invalid height for inline rot:%d max:%d\n",
+				src.y2, sblk->rotation_cfg->rot_maxheight);
+		return -EINVAL;
+	}
+
+	supported_formats = sblk->rotation_cfg->rot_format_list;
+	num_formats = sblk->rotation_cfg->rot_num_formats;
+
+	if (!DPU_FORMAT_IS_UBWC(fmt) || !dpu_find_format(fmt, supported_formats, num_formats))
+		return -EINVAL;
+
+	return 0;
+}
+
  static int dpu_plane_atomic_check(struct drm_plane *plane,
  				  struct drm_atomic_state *state)
  {
@@ -968,15 +1021,19 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
  	const struct dpu_format *fmt;
  	struct drm_rect src, dst, fb_rect = { 0 };
  	uint32_t min_src_size, max_linewidth;
+	unsigned int rotation = 0;

No need to init it here.

+	uint32_t supported_rotations = DRM_MODE_REFLECT_MASK | DRM_MODE_ROTATE_0;
+	const struct dpu_sspp_cfg *pipe_hw_caps = pdpu->pipe_hw->cap;
+	const struct dpu_sspp_sub_blks *sblk = pdpu->pipe_hw->cap->sblk;
if (new_plane_state->crtc)
  		crtc_state = drm_atomic_get_new_crtc_state(state,
  							   new_plane_state->crtc);
- min_scale = FRAC_16_16(1, pdpu->pipe_hw->cap->sblk->maxupscale);
+	min_scale = FRAC_16_16(1, sblk->maxupscale);
  	ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
  						  min_scale,
-						  pdpu->pipe_hw->cap->sblk->maxdwnscale << 16,
+						  sblk->maxdwnscale << 16,
  						  true, true);
  	if (ret) {
  		DPU_DEBUG_PLANE(pdpu, "Check plane state failed (%d)\n", ret);
@@ -1002,8 +1059,8 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
  	min_src_size = DPU_FORMAT_IS_YUV(fmt) ? 2 : 1;
if (DPU_FORMAT_IS_YUV(fmt) &&
-		(!(pdpu->pipe_hw->cap->features & DPU_SSPP_SCALER) ||
-		 !(pdpu->pipe_hw->cap->features & DPU_SSPP_CSC_ANY))) {
+		(!(pipe_hw_caps->features & DPU_SSPP_SCALER) ||
+		 !(pipe_hw_caps->features & DPU_SSPP_CSC_ANY))) {
  		DPU_DEBUG_PLANE(pdpu,
  				"plane doesn't have scaler/csc for yuv\n");
  		return -EINVAL;
@@ -1036,6 +1093,20 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
  		return -E2BIG;
  	}

Please move supported_rotations initialization here, so that it's clear that it is initialized conditionally.

+	if (pipe_hw_caps->features & BIT(DPU_SSPP_INLINE_ROTATION))
+		supported_rotations |= DRM_MODE_ROTATE_90;
+
+	rotation = drm_rotation_simplify(new_plane_state->rotation,
+					supported_rotations);
+
+	if ((pipe_hw_caps->features & BIT(DPU_SSPP_INLINE_ROTATION)) &&
+		(rotation & DRM_MODE_ROTATE_90)) {
+		ret = dpu_plane_check_inline_rotation(pdpu, sblk, src, fmt);
+		if (ret)
+			return ret;
+	}
+
+	pstate->rotation = rotation;
  	pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
return 0;
@@ -1151,21 +1222,19 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
  				pstate->multirect_mode);
if (pdpu->pipe_hw->ops.setup_format) {
-		unsigned int rotation;
+		unsigned int rotation = pstate->rotation;
src_flags = 0x0; - rotation = drm_rotation_simplify(state->rotation,
-						 DRM_MODE_ROTATE_0 |
-						 DRM_MODE_REFLECT_X |
-						 DRM_MODE_REFLECT_Y);
-
  		if (rotation & DRM_MODE_REFLECT_X)
  			src_flags |= DPU_SSPP_FLIP_LR;
if (rotation & DRM_MODE_REFLECT_Y)
  			src_flags |= DPU_SSPP_FLIP_UD;
+ if (rotation & DRM_MODE_ROTATE_90)
+			src_flags |= DPU_SSPP_ROT_90;
+
  		/* update format */
  		pdpu->pipe_hw->ops.setup_format(pdpu->pipe_hw, fmt, src_flags,
  				pstate->multirect_index);
@@ -1531,11 +1600,7 @@ struct drm_plane *dpu_plane_init(struct drm_device *dev,
  			BIT(DRM_MODE_BLEND_COVERAGE));
drm_plane_create_rotation_property(plane,
-			DRM_MODE_ROTATE_0,
-			DRM_MODE_ROTATE_0 |
-			DRM_MODE_ROTATE_180 |
-			DRM_MODE_REFLECT_X |
-			DRM_MODE_REFLECT_Y);
+		    DRM_MODE_ROTATE_0, pdpu->pipe_hw->cap->rot_supported);

You remember, I thought that we might be able to use a common mask here and in drm_rotation_simplify. As it's not the case, let's move rot_supported calculation here.

You won't need to store any additional data in the dpu_sspp_cfg, please check the features' DPU_SSPP_INLINE_ROTATION bit.

drm_plane_enable_fb_damage_clips(plane); diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
index 50781e2..e146310 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
@@ -26,6 +26,7 @@
   * @plane_fetch_bw: calculated BW per plane
   * @plane_clk: calculated clk per plane
   * @needs_dirtyfb: whether attached CRTC needs pixel data explicitly flushed
+ * @rotation: simplified drm rotation hint
   */
  struct dpu_plane_state {
  	struct drm_plane_state base;
@@ -40,6 +41,7 @@ struct dpu_plane_state {
  	u64 plane_clk;
bool needs_dirtyfb;
+	unsigned int rotation;
  };
/**


--
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux