Enabling rxmacro and txmacro nodes by defaults makes Qualcomm RB5 to
crash and reboot while probing audio devices. Disable these device tree
nodes by default and enabled them only when necessary (for the
SM8250-MTP board).
Fixes: 24f52ef0c4bf ("arm64: dts: qcom: sm8250: Add nodes for tx and rx macros with soundwire masters")
Cc: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 12 ++++++++++++
arch/arm64/boot/dts/qcom/sm8250.dtsi | 4 ++++
2 files changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index fb99cc2827c7..7ab3627cc347 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -622,6 +622,10 @@ &qupv3_id_2 {
status = "okay";
};
+&rxmacro {
+ status = "okay";
+};
+
&slpi {
status = "okay";
firmware-name = "qcom/sm8250/slpi.mbn";
@@ -773,6 +777,8 @@ right_spkr: wsa8810-left@0,4{
};
&swr1 {
+ status = "okay";
+
wcd_rx: wcd9380-rx@0,4 {
compatible = "sdw20217010d00";
reg = <0 4>;
@@ -781,6 +787,8 @@ wcd_rx: wcd9380-rx@0,4 {
};
&swr2 {
+ status = "okay";
+
wcd_tx: wcd9380-tx@0,3 {
compatible = "sdw20217010d00";
reg = <0 3>;
@@ -819,6 +827,10 @@ config {
};
};
+&txmacro {
+ status = "okay";
+};
+
&uart12 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 5617a46e5ccd..b433b27b2311 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2150,6 +2150,7 @@ rxmacro: rxmacro@3200000 {
pinctrl-0 = <&rx_swr_active>;
compatible = "qcom,sm8250-lpass-rx-macro";
reg = <0 0x3200000 0 0x1000>;
+ status = "disabled";
clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
@@ -2168,6 +2169,7 @@ rxmacro: rxmacro@3200000 {
swr1: soundwire-controller@3210000 {
reg = <0 0x3210000 0 0x2000>;
compatible = "qcom,soundwire-v1.5.1";
+ status = "disabled";
interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rxmacro>;
clock-names = "iface";
@@ -2195,6 +2197,7 @@ txmacro: txmacro@3220000 {
pinctrl-0 = <&tx_swr_active>;
compatible = "qcom,sm8250-lpass-tx-macro";
reg = <0 0x3220000 0 0x1000>;
+ status = "disabled";
clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
@@ -2218,6 +2221,7 @@ swr2: soundwire-controller@3230000 {
compatible = "qcom,soundwire-v1.5.1";
interrupts-extended = <&intc GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "core";
+ status = "disabled";
clocks = <&txmacro>;
clock-names = "iface";
--
2.30.2
