From: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx> REPORT LUNS command has "SELECT REPORT" field which controls what type of logical units to be reported by device server. According to UFS device standard, if this field is set to 0, REPORT LUNS would report only report standard logical units. If it's set to 1 then it would report only well known logical unit and if it's set to 2 then device would report both standard and well known logical units. Some well-known logical units might not have scsi upper-layer drivers. In such cases, the runtime PM reference count increased during device enumeration will not be decreased, causing the parent device (host) to always be on even during idle. This change allows the SCSI LLD (Low Level Driver) to choose which type of logical units should be detected. Signed-off-by: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx> Signed-off-by: Sujit Reddy Thumma <sthumma@xxxxxxxxxxxxxx> Signed-off-by: Dolev Raviv <draviv@xxxxxxxxxxxxxx> diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 4a6e4ba..5a0e164 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -802,6 +802,14 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, } else { sdev->type = (inq_result[0] & 0x1f); sdev->removable = (inq_result[1] & 0x80) >> 7; + + /* + * some devices may respond with wrong type for + * well-known logical units. Force well-known type + * to enumerate them correctly. + */ + if (scsi_is_wlun(sdev->lun) && (sdev->type != TYPE_WLUN)) + sdev->type = TYPE_WLUN; } switch (sdev->type) { @@ -817,6 +825,7 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, case TYPE_COMM: case TYPE_RAID: case TYPE_OSD: + case TYPE_WLUN: sdev->writeable = 1; break; case TYPE_ROM: @@ -1412,6 +1421,13 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags, */ memset(&scsi_cmd[1], 0, 5); + if (shost->report_wlus) + /* + * Set "SELECT REPORT" field to 0x2 which will make device to + * report well known logical units along with standard LUs. + */ + scsi_cmd[2] = 0x2; + /* * bytes 6 - 9: length of the command. */ diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 5f36788..ba9d0f0 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -1060,6 +1060,13 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev) } } + /* + * put runtime pm reference for well-known logical units, + * drivers are expected to _get_* again during probe. + */ + if (scsi_is_wlun(sdev->lun)) + scsi_autopm_put_device(sdev); + return error; } diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 91e2e42..6a9b102 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -332,6 +332,7 @@ static inline int scsi_status_is_good(int status) #define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */ #define TYPE_RBC 0x0e #define TYPE_OSD 0x11 +#define TYPE_WLUN 0x1e /* well-known logical unit */ #define TYPE_NO_LUN 0x7f /* SCSI protocols; these are taken from SPC-3 section 7.5 */ diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index b2bc519..05664c4 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -675,6 +675,11 @@ struct Scsi_Host { unsigned no_write_same:1; /* + * Set "SELECT REPORT" field to allow detection of well known logical + * units along with standard LUs. + */ + unsigned report_wlus:1; + /* * Optional work queue to be utilized by the transport */ char work_q_name[20]; -- 1.8.5.2 -- QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html