Re: [v1] ASoC: qcom: Add driver support for ALC5682I-VS.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Mar 30, 2022 at 04:45:19PM +0800, Judy Hsiao wrote:
> Subject: ASoC: qcom: Add driver support for ALC5682I-VS.

nit: drop period from the subject

> Add Machine driver support for ALC5682I-VS codec.
> 
> Signed-off-by: Judy Hsiao <judyhsiao@xxxxxxxxxxxx>
> ---
>  sound/soc/qcom/Kconfig  |   2 +
>  sound/soc/qcom/sc7280.c | 104 ++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 106 insertions(+)
> 
> diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
> index 28d0dfb4033c..750653404ba3 100644
> --- a/sound/soc/qcom/Kconfig
> +++ b/sound/soc/qcom/Kconfig
> @@ -197,6 +197,8 @@ config SND_SOC_SC7280
>  	select SND_SOC_LPASS_MACRO_COMMON
>  	imply SND_SOC_LPASS_RX_MACRO
>  	imply SND_SOC_LPASS_TX_MACRO
> +	select SND_SOC_RT5682_I2C
> +	select SND_SOC_RT5682S
>  	help
>  	  Add support for audio on Qualcomm Technologies Inc.
>  	  SC7280 SoC-based systems.
> diff --git a/sound/soc/qcom/sc7280.c b/sound/soc/qcom/sc7280.c
> index bd0bf9c8cb28..a3e6f61e92cb 100644
> --- a/sound/soc/qcom/sc7280.c
> +++ b/sound/soc/qcom/sc7280.c
> @@ -12,14 +12,20 @@
>  #include <sound/jack.h>
>  #include <sound/pcm.h>
>  #include <sound/soc.h>
> +#include <sound/rt5682s.h>
>  #include <linux/soundwire/sdw.h>
>  
> +#include "../codecs/rt5682.h"
> +#include "../codecs/rt5682s.h"
>  #include "common.h"
>  #include "lpass.h"
>  
> +#define DEFAULT_MCLK_RATE              19200000
> +#define RT5682_PLL1_FREQ (48000 * 512)
>  struct sc7280_snd_data {
>  	struct snd_soc_card card;
>  	struct sdw_stream_runtime *sruntime[LPASS_MAX_PORTS];
> +	u32 pri_mi2s_clk_count;
>  	struct snd_soc_jack hs_jack;
>  	struct snd_soc_jack hdmi_jack;
>  	bool jack_setup;
> @@ -69,6 +75,7 @@ static int sc7280_headset_init(struct snd_soc_pcm_runtime *rtd)
>  		pdata->jack_setup = true;
>  	}
>  	switch (cpu_dai->id) {
> +	case MI2S_PRIMARY:
>  	case LPASS_CDC_DMA_RX0:
>  	case LPASS_CDC_DMA_TX3:
>  		for_each_rtd_codec_dais(rtd, i, codec_dai) {
> @@ -110,11 +117,49 @@ static int sc7280_hdmi_init(struct snd_soc_pcm_runtime *rtd)
>  	return snd_soc_component_set_jack(component, &pdata->hdmi_jack, NULL);
>  }
>  
> +static int sc7280_rt5682_init(struct snd_soc_pcm_runtime *rtd)
> +{
> +	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> +	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> +	struct snd_soc_card *card = rtd->card;
> +	struct sc7280_snd_data *data = snd_soc_card_get_drvdata(card);
> +	int ret;
> +
> +	if (++data->pri_mi2s_clk_count == 1) {
> +		snd_soc_dai_set_sysclk(cpu_dai,
> +			LPASS_MCLK0,
> +			DEFAULT_MCLK_RATE,
> +			SNDRV_PCM_STREAM_PLAYBACK);
> +	}
> +	snd_soc_dai_set_fmt(codec_dai,
> +				SND_SOC_DAIFMT_CBS_CFS |
> +				SND_SOC_DAIFMT_NB_NF |
> +				SND_SOC_DAIFMT_I2S);
> +
> +	ret = snd_soc_dai_set_pll(codec_dai, RT5682S_PLL1, RT5682S_PLL_S_BCLK1,
> +					1536000, RT5682_PLL1_FREQ);
> +	if (ret) {
> +		dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = snd_soc_dai_set_sysclk(codec_dai, RT5682S_SCLK_S_PLL1,
> +					RT5682_PLL1_FREQ,
> +					SND_SOC_CLOCK_IN);
> +
> +	if (ret)
> +		dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n",
> +			ret);

With the current code the function would return 0, I imagine that's not
intended.

> +
> +	return 0;
> +}
> +



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux