It's noted that dcvs interrupts are not self-clearing, thus an interrupt
handler runs constantly, which leads to a severe regression in runtime.
To fix the problem an explicit write to clear interrupt register is
required.
Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
---
drivers/cpufreq/qcom-cpufreq-hw.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index f9d593ff4718..53954e5086e0 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -24,6 +24,8 @@
#define CLK_HW_DIV 2
#define LUT_TURBO_IND 1
+#define GT_IRQ_STATUS BIT(2)
+
#define HZ_PER_KHZ 1000
struct qcom_cpufreq_soc_data {
@@ -31,6 +33,7 @@ struct qcom_cpufreq_soc_data {
u32 reg_dcvs_ctrl;
u32 reg_freq_lut;
u32 reg_volt_lut;
+ u32 reg_intr_clr;
u32 reg_current_vote;
u32 reg_perf_state;
u8 lut_row_size;
@@ -350,6 +353,9 @@ static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data)
disable_irq_nosync(c_data->throttle_irq);
schedule_delayed_work(&c_data->throttle_work, 0);
+ writel_relaxed(GT_IRQ_STATUS,
+ c_data->base + c_data->soc_data->reg_intr_clr);
+
return IRQ_HANDLED;
}
@@ -368,6 +374,7 @@ static const struct qcom_cpufreq_soc_data epss_soc_data = {
.reg_dcvs_ctrl = 0xb0,
.reg_freq_lut = 0x100,
.reg_volt_lut = 0x200,
+ .reg_intr_clr = 0x308,
.reg_perf_state = 0x320,
.lut_row_size = 4,
};
--
2.33.0
