Add bindings for pm8008 regulators device. Signed-off-by: Satya Priya <quic_c_skakit@xxxxxxxxxxx> --- Changes in V8: - This is split from pm8008.yaml binding. .../bindings/mfd/qcom,pm8008-regulators.yaml | 87 ++++++++++++++++++++++ 1 file changed, 87 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/qcom,pm8008-regulators.yaml diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008-regulators.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008-regulators.yaml new file mode 100644 index 0000000..139fbf9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008-regulators.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/qcom,pm8008-regulators.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. PM8008 Regulator bindings + +maintainers: + - Satya Priya <quic_c_skakit@xxxxxxxxxxx> + +description: | + Qualcomm Technologies, Inc. PM8008 is an I2C controlled PMIC + containing 7 LDO regulators. This binding specifies the PM8008 + regulator peripherals of PM8008 device. + +properties: + compatible: + const: qcom,pm8008-regulators + + reg: + description: + I2C slave address. + + maxItems: 1 + + "#address-cells": + const: 0 + + "#size-cells": + const: 0 + + vdd_l1_l2-supply: + description: Input supply phandle of ldo1 and ldo2 regulators. + + vdd_l3_l4-supply: + description: Input supply phandle of ldo3 and ldo4 regulators. + + vdd_l5-supply: + description: Input supply phandle of ldo5 regulator. + + vdd_l6-supply: + description: Input supply phandle of ldo6 regulator. + + vdd_l7-supply: + description: Input supply phandle of ldo7 regulator. + +patternProperties: + "^ldo[1-7]$": + type: object + $ref: "../regulator/regulator.yaml#" + description: PM8008 regulator peripherals of PM8008 regulator device + +required: + - compatible + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/mfd/qcom-pm8008.h> + #include <dt-bindings/interrupt-controller/irq.h> + qupv3_se13_i2c { + #address-cells = <1>; + #size-cells = <0>; + pm8008_regulators: pmic@9 { + compatible = "qcom,pm8008-regulators"; + reg = <0x9>; + #address-cells = <0>; + #size-cells = <0>; + + vdd_l1_l2-supply = <&vreg_s8b_1p2>; + vdd_l3_l4-supply = <&vreg_s1b_1p8>; + vdd_l5-supply = <&vreg_bob>; + vdd_l6-supply = <&vreg_bob>; + vdd_l7-supply = <&vreg_bob>; + + pm8008_l1: ldo1 { + regulator-name = "pm8008_l1"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + }; + }; + }; +... -- 2.7.4
