Re: [PATCH 1/1] arm64: dts: qcom: bullhead: Fix sdcard1 overclocking

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

> rev 1.01 (msm8992-lg-bullhead-rev-101.dts) has overclocking warnings:
> [    1.997606] mmc0: Card appears overclocked; req 200000000 Hz, actual 343999999 Hz
> [    1.997681] mmc0: Card appears overclocked; req 200000000 Hz, actual 343999999 Hz
> [    2.010904] mmc0: Card appears overclocked; req 400000000 Hz, actual 687999999 Hz
> [    2.012961] mmc0: Card appears overclocked; req 200000000 Hz, actual 343999999 Hz
> [    2.027497] mmc0: Card appears overclocked; req 400000000 Hz, actual 687999999 Hz
> [    2.027607] mmc0: Card appears overclocked; req 400000000 Hz, actual 687999999 Hz
> [    2.039699] mmc0: new HS400 MMC card at address 0001

> Similarly to angler use gcc GPLL4_EARLY to get rid of the warnings.
> Not tested on 1.0, but should work here as well.

As I wrote at Konrad's patch "clk: qcom: gcc-msm8994: Fix gpll4 width" [1]
with that fix this workaround is not needed if Konrad's patch applied.

Kind regards,
Petr

[1] https://lore.kernel.org/linux-arm-msm/YjuE+cgGXCLihPIa@pevik/T/#t



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux