The gpll4 postdiv is actually a div4, so make sure that Linux is aware of
this.
This fixes the following error messages:
[ 0.804491] mmc1: Card appears overclocked; req 200000000 Hz, actual 343999999 Hz
[ 0.805057] mmc1: Card appears overclocked; req 400000000 Hz, actual 687999999 Hz
Fixes: aec89f78cf01 ("clk: qcom: Add support for msm8994 global clock controller")
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
Cc: Petr Vorel <petr.vorel@xxxxxxxxx>
drivers/clk/qcom/gcc-msm8994.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/qcom/gcc-msm8994.c b/drivers/clk/qcom/gcc-msm8994.c
index f09499999eb3..6b702cdacbf2 100644
--- a/drivers/clk/qcom/gcc-msm8994.c
+++ b/drivers/clk/qcom/gcc-msm8994.c
@@ -77,6 +77,7 @@ static struct clk_alpha_pll gpll4_early = {
static struct clk_alpha_pll_postdiv gpll4 = {
.offset = 0x1dc0,
+ .width = 4,
.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
.clkr.hw.init = &(struct clk_init_data){
.name = "gpll4",
--
2.35.1
