Configure and enable the nodes for UFS that are used for internal
storage on FP4.
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
.../boot/dts/qcom/sm7225-fairphone-fp4.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index adb6ca2be2a5..533a1c88040f 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -336,6 +336,24 @@ &uart2 {
status = "okay";
};
+&ufs_mem_hc {
+ status = "okay";
+
+ reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l7e>;
+ vcc-max-microamp = <800000>;
+ vccq2-supply = <&vreg_l12a>;
+ vccq2-max-microamp = <800000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l18a>;
+ vdda-pll-supply = <&vreg_l22a>;
+};
+
&usb_1 {
status = "okay";
};
--
2.35.1
