[PATCH v3 16/18] ARM: dts: qcom: remove redundant binding from ipq8064 rb3011 dts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Mdio0_pins are now declared in ipq8064 dtsi. Usb phy are enabled by
default.

Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
Tested-by: Jonathan McDowell <noodles@xxxxxxxx>
---
 arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index 611a4a19631c..22a4fa8b5e2b 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -259,10 +259,6 @@ &gsbi7_serial {
 	status = "okay";
 };
 
-&hs_phy_1 {
-	status = "okay";
-};
-
 &nand {
 	status = "okay";
 
@@ -309,15 +305,6 @@ mux {
 		};
 	};
 
-	mdio0_pins: mdio0_pins {
-		mux {
-			pins = "gpio0", "gpio1";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
 	mdio1_pins: mdio1_pins {
 		mux {
 			pins = "gpio10", "gpio11";
@@ -358,10 +345,6 @@ mux {
 	};
 };
 
-&ss_phy_1 {
-	status = "okay";
-};
-
 &usb3_1 {
 	pinctrl-0 = <&usb1_pwr_en_pins>;
 	pinctrl-names = "default";
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux