[PATCH v3 18/18] ARM: dts: qcom: add ipq8065 dtsi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Many device are based on ipq8065 SoC. Ipq8065 is an evolution of the
ipq8064 SoC (also named ipq8064-v3.0 from qsdk) that has all the
improvement from ipq8064-v2.0 with the addition of a more powerful CPU
that can now be clocked to 1.7Ghz, a quicker L2 cache that can be
clocked to 1.4Ghz. It also shipped with more powerful regulators to
provide the required voltage to the CPUs and L2.

Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
Tested-by: Jonathan McDowell <noodles@xxxxxxxx>
---
 arch/arm/boot/dts/qcom-ipq8065.dtsi | 168 ++++++++++++++++++++++++++++
 1 file changed, 168 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-ipq8065.dtsi

diff --git a/arch/arm/boot/dts/qcom-ipq8065.dtsi b/arch/arm/boot/dts/qcom-ipq8065.dtsi
new file mode 100644
index 000000000000..817d723b0c88
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-ipq8064.dtsi"
+
+/ {
+	model = "Qualcomm IPQ8065";
+	compatible = "qcom,ipq8065", "qcom,ipq8064";
+
+	aliases {
+		serial0 = &gsbi4_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+};
+
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+
+	serial@16340000 {
+		status = "okay";
+	};
+	/*
+	 * The i2c device on gsbi4 should not be enabled.
+	 * On ipq806x designs gsbi4 i2c is meant for exclusive
+	 * RPM usage. Turning this on in kernel manifests as
+	 * i2c failure for the RPM.
+	 */
+};
+
+&pcie0 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie1 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie2 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&sata {
+	ports-implemented = <0x1>;
+};
+
+&smb208_s2a {
+	regulator-min-microvolt = <775000>;
+	regulator-max-microvolt = <1275000>;
+};
+
+&smb208_s2b {
+	regulator-min-microvolt = <775000>;
+	regulator-max-microvolt = <1275000>;
+};
+
+&ss_phy_0 {
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
+};
+
+&ss_phy_1 {
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
+};
+
+&opp_table_l2 {
+	/delete-node/opp-1200000000;
+
+	opp-1400000000 {
+		opp-hz = /bits/ 64 <1400000000>;
+		opp-microvolt = <1150000>;
+		clock-latency-ns = <100000>;
+		opp-level = <2>;
+	};
+};
+
+&opp_table0 {
+	/*
+	 * On ipq8065 1.2 ghz freq is not present
+	 * Remove it to make cpufreq work and not
+	 * complain for missing definition
+	 */
+
+	/delete-node/opp-1200000000;
+
+	/*
+	 * Voltage thresholds are <target min max>
+	 */
+	opp-384000000 {
+		opp-microvolt-speed0-pvs0-v0 = <975000 926250 1023750>;
+		opp-microvolt-speed0-pvs1-v0 = <950000 902500 997500>;
+		opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
+		opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
+		opp-microvolt-speed0-pvs4-v0 = <875000 831250 918750>;
+		opp-microvolt-speed0-pvs5-v0 = <825000 783750 866250>;
+		opp-microvolt-speed0-pvs6-v0 = <775000 736250 813750>;
+	};
+
+	opp-600000000 {
+		opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
+		opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
+		opp-microvolt-speed0-pvs2-v0 = <950000 902500 997500>;
+		opp-microvolt-speed0-pvs3-v0 = <925000 878750 971250>;
+		opp-microvolt-speed0-pvs4-v0 = <900000 855000 945000>;
+		opp-microvolt-speed0-pvs5-v0 = <850000 807500 892500>;
+		opp-microvolt-speed0-pvs6-v0 = <800000 760000 840000>;
+	};
+
+	opp-800000000 {
+		opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
+		opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
+		opp-microvolt-speed0-pvs2-v0 = <1000000 950000 1050000>;
+		opp-microvolt-speed0-pvs3-v0 = <975000 926250 1023750>;
+		opp-microvolt-speed0-pvs4-v0 = <950000 902500 997500>;
+		opp-microvolt-speed0-pvs5-v0 = <900000 855000 945000>;
+		opp-microvolt-speed0-pvs6-v0 = <850000 807500 892500>;
+	};
+
+	opp-1000000000 {
+		opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
+		opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
+		opp-microvolt-speed0-pvs2-v0 = <1050000 997500 1102500>;
+		opp-microvolt-speed0-pvs3-v0 = <1025000 973750 1076250>;
+		opp-microvolt-speed0-pvs4-v0 = <1000000 950000 1050000>;
+		opp-microvolt-speed0-pvs5-v0 = <950000 902500 997500>;
+		opp-microvolt-speed0-pvs6-v0 = <900000 855000 945000>;
+	};
+
+	opp-1400000000 {
+		opp-microvolt-speed0-pvs0-v0 = <1175000 1116250 1233750>;
+		opp-microvolt-speed0-pvs1-v0 = <1150000 1092500 1207500>;
+		opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
+		opp-microvolt-speed0-pvs3-v0 = <1100000 1045000 1155000>;
+		opp-microvolt-speed0-pvs4-v0 = <1075000 1021250 1128750>;
+		opp-microvolt-speed0-pvs5-v0 = <1025000 973750 1076250>;
+		opp-microvolt-speed0-pvs6-v0 = <975000 926250 1023750>;
+		opp-level = <1>;
+	};
+
+	opp-1725000000 {
+		opp-hz = /bits/ 64 <1725000000>;
+		opp-microvolt-speed0-pvs0-v0 = <1262500 1199375 1325625>;
+		opp-microvolt-speed0-pvs1-v0 = <1225000 1163750 1286250>;
+		opp-microvolt-speed0-pvs2-v0 = <1200000 1140000 1260000>;
+		opp-microvolt-speed0-pvs3-v0 = <1175000 1116250 1233750>;
+		opp-microvolt-speed0-pvs4-v0 = <1150000 1092500 1207500>;
+		opp-microvolt-speed0-pvs5-v0 = <1100000 1045000 1155000>;
+		opp-microvolt-speed0-pvs6-v0 = <1050000 997500 1102500>;
+		opp-supported-hw = <0x1>;
+		clock-latency-ns = <100000>;
+		opp-level = <2>;
+	};
+};
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux