[PATCH v3 06/18] ARM: dts: qcom: enable usb phy by default for ipq8064

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enable usb phy by default. When the usb phy were pushed, half of them
were flagged as disabled by mistake. Fix this to correctly init dwc3
node on any ipq8064 based SoC.

Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
Tested-by: Jonathan McDowell <noodles@xxxxxxxx>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 9d658fcc1f12..e247bf51df01 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1175,8 +1175,6 @@ hs_phy_0: phy@100f8800 {
 			clocks = <&gcc USB30_0_UTMI_CLK>;
 			clock-names = "ref";
 			#phy-cells = <0>;
-
-			status = "disabled";
 		};
 
 		ss_phy_0: phy@100f8830 {
@@ -1185,8 +1183,6 @@ ss_phy_0: phy@100f8830 {
 			clocks = <&gcc USB30_0_MASTER_CLK>;
 			clock-names = "ref";
 			#phy-cells = <0>;
-
-			status = "disabled";
 		};
 
 		usb3_0: usb3@100f8800 {
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux