Update LTR threshold scale and value based on LTRME (Latency
Tolenrance Reporting Mechanism) from device capabilities.
In ASPM driver, LTR threshold scale and value is updating
based on tcommon_mode and t_poweron values. In kioxia NVMe,
L1.2 is failing due to LTR threshold scale and value is
greater values than max snoop/non snoop value.
In general, updated LTR threshold scale and value should be
less than max snoop/non snoop value to enter the device
into L1.2 state.
Signed-off-by: Prasad Malisetty <quic_pmaliset@xxxxxxxxxxx>
---
drivers/pci/pcie/aspm.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index a96b742..9822bd7 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -499,9 +499,14 @@ static void aspm_calc_l1ss_info(struct pcie_link_state *link,
* Table 5-11. T(POWER_OFF) is at most 2us and T(L1.2) is at
* least 4us.
*/
- l1_2_threshold = 2 + 4 + t_common_mode + t_power_on;
- encode_l12_threshold(l1_2_threshold, &scale, &value);
- ctl1 |= t_common_mode << 8 | scale << 29 | value << 16;
+ pcie_capability_read_dword(child, PCI_EXP_DEVCAP2, &cap);
+ if (!(cap & PCI_EXP_DEVCAP2_LTR)) {
+ l1_2_threshold = 2 + 4 + t_common_mode + t_power_on;
+ encode_l12_threshold(l1_2_threshold, &scale, &value);
+ ctl1 |= scale << 29 | value << 16;
+ }
+
+ ctl1 | = t_common_mode;
/* Some broken devices only support dword access to L1 SS */
pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, &pctl1);
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
