[PATCH v2 3/3] arm64: dts: qcom: sc7280: Update SNPS Phy params for SC7280 IDP device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Overriding the SNPS Phy tuning parameters for SC7280 IDP device.

Signed-off-by: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index ecbf2b8..0fbc5a1 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -317,6 +317,12 @@
 	vdda-pll-supply = <&vreg_l10c_0p8>;
 	vdda33-supply = <&vreg_l2b_3p0>;
 	vdda18-supply = <&vreg_l1c_1p8>;
+	qcom,hs-disconnect = <6>;
+	qcom,squelch-detector = <7>;
+	qcom,hs-amplitude = <11>;
+	qcom,hs-rise-fall-time = <2>;
+	qcom,hs-crossover-voltage = <1>;
+	qcom,hs-output-impedance = <1>;
 };
 
 &usb_1_qmpphy {
-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux