RE: [PATCH V1] mmc: sdhci-msm: Reset GCC_SDCC_BCR register for SDHC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



++

-----Original Message-----
From: Shaik Sajida Bhanu <quic_c_sbhanu@xxxxxxxxxxx> 
Sent: Tuesday, March 1, 2022 12:25 PM
To: ulf.hansson@xxxxxxxxxx; adrian.hunter@xxxxxxxxx
Cc: asutoshd@xxxxxxxxxxxxxx; stummala@xxxxxxxxxxxxxx; sayalil@xxxxxxxxxxxxxx; cang@xxxxxxxxxxxxxx; rampraka@xxxxxxxxxxxxxx; linux-mmc@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-arm-msm@xxxxxxxxxxxxxxx; Sajida Bhanu (Temp) (QUIC) <quic_c_sbhanu@xxxxxxxxxxx>
Subject: [PATCH V1] mmc: sdhci-msm: Reset GCC_SDCC_BCR register for SDHC

Reset GCC_SDCC_BCR register before every fresh initilazation. This will reset whole SDHC-msm controller, clears the previous power control states and avoids, software reset timeout issues as below.

[ 5.458061][ T262] mmc1: Reset 0x1 never completed.
[ 5.462454][ T262] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 5.469065][ T262] mmc1: sdhci: Sys addr: 0x00000000 | Version:
0x00007202
[ 5.475688][ T262] mmc1: sdhci: Blk size: 0x00000000 | Blk cnt:
0x00000000
[ 5.482315][ T262] mmc1: sdhci: Argument: 0x00000000 | Trn mode:
0x00000000
[ 5.488927][ T262] mmc1: sdhci: Present: 0x01f800f0 | Host ctl:
0x00000000
[ 5.495539][ T262] mmc1: sdhci: Power: 0x00000000 | Blk gap: 0x00000000 [ 5.502162][ T262] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00000003 [ 5.508768][ T262] mmc1: sdhci: Timeout: 0x00000000 | Int stat:
0x00000000
[ 5.515381][ T262] mmc1: sdhci: Int enab: 0x00000000 | Sig enab:
0x00000000
[ 5.521996][ T262] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int:
0x00000000
[ 5.528607][ T262] mmc1: sdhci: Caps: 0x362dc8b2 | Caps_1: 0x0000808f [ 5.535227][ T262] mmc1: sdhci: Cmd: 0x00000000 | Max curr: 0x00000000 [ 5.541841][ T262] mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]:
0x00000000
[ 5.548454][ T262] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]:
0x00000000
[ 5.555079][ T262] mmc1: sdhci: Host ctl2: 0x00000000 [ 5.559651][ T262] mmc1: sdhci_msm: ----------- VENDOR REGISTER
DUMP-----------
[ 5.566621][ T262] mmc1: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:
0x6000642c |
DLL cfg2: 0x0020a000
[ 5.575465][ T262] mmc1: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl:
0x00010800 | DDR cfg: 0x80040873
[ 5.584658][ T262] mmc1: sdhci_msm: Vndr func: 0x00018a9c | Vndr func2 :
0xf88218a8 Vndr func3: 0x02626040

Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@xxxxxxxxxxx>
---
 drivers/mmc/host/sdhci-msm.c | 48 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 50c71e0..f10b3c7 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -17,6 +17,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/interconnect.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/reset.h>
 
 #include "sdhci-pltfm.h"
 #include "cqhci.h"
@@ -284,6 +285,7 @@ struct sdhci_msm_host {
 	bool uses_tassadar_dll;
 	u32 dll_config;
 	u32 ddr_config;
+	struct reset_control *core_reset;
 	bool vqmmc_enabled;
 };
 
@@ -2482,6 +2484,45 @@ static inline void sdhci_msm_get_of_property(struct platform_device *pdev,
 	of_property_read_u32(node, "qcom,dll-config", &msm_host->dll_config);  }
 
+static int sdhci_msm_gcc_reset(struct platform_device *pdev,
+	       struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+	int ret = 0;
+
+	msm_host->core_reset = devm_reset_control_get(&pdev->dev, "core_reset");
+	if (IS_ERR(msm_host->core_reset)) {
+		ret = PTR_ERR(msm_host->core_reset);
+		dev_err(&pdev->dev, "core_reset unavailable (%d)\n", ret);
+		msm_host->core_reset = NULL;
+	}
+	if (msm_host->core_reset) {
+		ret = reset_control_assert(msm_host->core_reset);
+		if (ret) {
+			dev_err(&pdev->dev, "core_reset assert failed (%d)\n",
+						ret);
+			goto out;
+		}
+		/*
+		 * The hardware requirement for delay between assert/deassert
+		 * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to
+		 * ~125us (4/32768). To be on the safe side add 200us delay.
+		 */
+		usleep_range(200, 210);
+
+		ret = reset_control_deassert(msm_host->core_reset);
+		if (ret) {
+			dev_err(&pdev->dev, "core_reset deassert failed (%d)\n",
+						ret);
+			goto out;
+		}
+		usleep_range(200, 210);
+	}
+
+out:
+	return ret;
+}
 
 static int sdhci_msm_probe(struct platform_device *pdev)  { @@ -2529,6 +2570,13 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 
 	msm_host->saved_tuning_phase = INVALID_TUNING_PHASE;
 
+	ret = sdhci_msm_gcc_reset(pdev, host);
+	if (ret) {
+		dev_err(&pdev->dev, "core_reset assert/deassert failed (%d)\n",
+					ret);
+		goto pltfm_free;
+	}
+
 	/* Setup SDCC bus voter clock. */
 	msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus");
 	if (!IS_ERR(msm_host->bus_clk)) {
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux