[PATCH 5/7] arm64: dts: qcom: pmr735a: stop depending on thermal_zones label

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Most of SoC device trees do not provide the thermal_zones label. Thus
stop depending on it and use the full path to the thermal zones nodes.

Fixes: 7a3544e5d4e8 ("arm64: dts: qcom: pmr735a: Add temp-alarm support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/pmr735a.dtsi | 32 ++++++++++++++-------------
 1 file changed, 17 insertions(+), 15 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/pmr735a.dtsi b/arch/arm64/boot/dts/qcom/pmr735a.dtsi
index b4b6ba24f845..febda50779f9 100644
--- a/arch/arm64/boot/dts/qcom/pmr735a.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735a.dtsi
@@ -32,23 +32,25 @@ pmr735a_gpios: gpio@8800 {
 	};
 };
 
-&thermal_zones {
-	pmr735a_thermal: pmr735a-thermal {
-		polling-delay-passive = <100>;
-		polling-delay = <0>;
-		thermal-sensors = <&pmr735a_temp_alarm>;
+/ {
+	thermal-zones {
+		pmr735a_thermal: pmr735a-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmr735a_temp_alarm>;
 
-		trips {
-			pmr735a_trip0: trip0 {
-				temperature = <95000>;
-				hysteresis = <0>;
-				type = "passive";
-			};
+			trips {
+				pmr735a_trip0: trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
 
-			pmr735a_crit: pmr735a-crit {
-				temperature = <115000>;
-				hysteresis = <0>;
-				type = "critical";
+				pmr735a_crit: pmr735a-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
 			};
 		};
 	};
-- 
2.30.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux