[PATCH] i2c: qup: disable clks and return instead of just returning error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This fixes a error handling scenario where clocks were not being disabled
when QUP_OUTPUT_BLOCK_SIZE returns a size greater thanat size of blk_sizes
array. So this patch adds a statement to jump to err lable to release the
clocks.

Wolfram Sang <wsa@xxxxxxxxxxxxx>
Grant Likely <grant.likely@xxxxxxxxxx>
Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
Andy Gross <agross@xxxxxxxxxxxxxx>
"Ivan T. Ivanov" <iivanov@xxxxxxxxxx>

Signed-off-by: Pramod Gurav <pramod.gurav@xxxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-qup.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 2a5efb5..3a4d64e 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -633,13 +633,17 @@ static int qup_i2c_probe(struct platform_device *pdev)
 	 * associated with each byte written/received
 	 */
 	size = QUP_OUTPUT_BLOCK_SIZE(io_mode);
-	if (size >= ARRAY_SIZE(blk_sizes))
-		return -EIO;
+	if (size >= ARRAY_SIZE(blk_sizes)) {
+		ret = -EIO;
+		goto fail;
+	}
 	qup->out_blk_sz = blk_sizes[size] / 2;
 
 	size = QUP_INPUT_BLOCK_SIZE(io_mode);
-	if (size >= ARRAY_SIZE(blk_sizes))
-		return -EIO;
+	if (size >= ARRAY_SIZE(blk_sizes)) {
+		ret = -EIO;
+		goto fail;
+	}
 	qup->in_blk_sz = blk_sizes[size] / 2;
 
 	size = QUP_OUTPUT_FIFO_SIZE(io_mode);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux