Re: [PATCH] ARM: dts: qcom: Add chosen node information for SDX65.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2/25/2022 1:14 AM, Bjorn Andersson wrote:
On Fri 11 Feb 04:20 CST 2022, Rohit Agarwal wrote:

Add chosen node in the base dtsi file of SDX65.

While this happens to be the same on most boards, it is still a
board-specific decision which UART is the debug uart, or if there is one
at all...

So this property should remain in the dts.

Thanks,
Bjorn

Without the chosen node in base dtsi, the device is not booting up.
Can we have an empty chosen node in the base dtsi and the board-specific details
updated in the respective dts file. The device boots up with this.

Thanks,
Rohit

Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
---
  arch/arm/boot/dts/qcom-sdx65-mtp.dts | 4 ----
  arch/arm/boot/dts/qcom-sdx65.dtsi    | 4 ++++
  2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index 59457da..3a75c21 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -14,10 +14,6 @@
  	aliases {
  		serial0 = &blsp1_uart3;
  	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
  };
&blsp1_uart3 {
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 796641d..653df15 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -17,6 +17,10 @@
  	qcom,msm-id = <458 0x10000>, <483 0x10000>, <509 0x10000>;
  	interrupt-parent = <&intc>;
+ chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
  	memory {
  		device_type = "memory";
  		reg = <0 0>;
--
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux