Hi Stanimir. On Friday 01 August 2014 08:00 PM, Stanimir Varbanov wrote: > Hello all, > > Changes since v3: > - rename the driver to qcom-spmi-pmic - suggested by David Collins > - spmi regmap config now initialize .fast_io to true > - added generalized comptatible string in DT binding document and driver > - I dropped the pm8921 rename patch for now, it will be subject of another > patchset later on. > > regards, > Stan > > -------------------------------------------------------------------------------- > > Changes since v2: > - 1/4 - added new line, signed-off-by / acked-by and module_authors. > - 3/4 - the subject has been changed. > > The previous v2 can be found at [1]. > > I'm still waiting Acks for: > - 4/4 from Qualcomm folks. If I am not missing something obvious, this patch needs to be resent as it does not apply on top of patches in this series. I tried applying and it fails in Kconfig. > - 2/4 and 3/4 from DT folks. > > The patchset is ready to merge version and also it can be treated as an > intermediate step until we find a solution for non-translatable peripheral > addresses. > > [1] https://lkml.org/lkml/2014/7/17/877 > > -------------------------------------------------------------------------------- > > Hello everyone, > > Here is the continuation of patch sets sent recently about Qualcomm > QPNP SPMI PMICs. > > The previous version of the patch set can be found at [1]. > > Changes since v1: > - removed completely custom *of* parser > - renamed the mfd driver from qpnp-spmi to pm8xxx-spmi > - now MFD_PM8XXX_SPMI Kconfig option depends on SPMI > > Removing of the custom *of* parser leads to that that the *reg* devicetree > property cannot exist and therefore cannot be parsed to get PMIC peripheral > resources. I took this step aside because no one from mfd drivers does this > parsing. This will lead to inconvenience in the peripheral drivers to define > internally the SPMI base addresses depending on the compatible property > i.e. PMIC version. > > Comments are welcome! > > [1] https://lkml.org/lkml/2014/7/8/428 > > -------------------------------------------------------------------------------- > > Josh Cartwright (1): > mfd: add support for Qualcomm SPMI PMICs > > Stanimir Varbanov (2): > mfd: document DT bindings for Qualcomm SPMI PMICs > ARM: dts: qcom: add pm8941 and pm8841 PMICs device nodes > > .../devicetree/bindings/mfd/qcom,spmi-pmic.txt | 64 +++++++++++++++++++ > arch/arm/boot/dts/qcom-msm8974.dtsi | 37 +++++++++++ > drivers/mfd/Kconfig | 15 +++++ > drivers/mfd/Makefile | 1 + > drivers/mfd/qcom-spmi-pmic.c | 67 ++++++++++++++++++++ > 5 files changed, 184 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt > create mode 100644 drivers/mfd/qcom-spmi-pmic.c > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html