Re: [RFC PATCH v2 3/5] drm/msm/dp: support finding next bridge even for DP interfaces

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 2/11/2022 2:40 PM, Dmitry Baryshkov wrote:
It is possible to supply display-connector (bridge) to the DP interface,
add support for parsing it too.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
  drivers/gpu/drm/msm/dp/dp_parser.c | 19 ++++++++++++-------
  1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c b/drivers/gpu/drm/msm/dp/dp_parser.c
index 901d7967370f..1056b8d5755b 100644
--- a/drivers/gpu/drm/msm/dp/dp_parser.c
+++ b/drivers/gpu/drm/msm/dp/dp_parser.c
@@ -301,17 +301,22 @@ static int dp_parser_parse(struct dp_parser *parser, int connector_type)
  		return rc;
/*
-	 * Currently we support external bridges only for eDP connectors.
+	 * External bridges are mandatory for eDP interfaces: one has to
+	 * provide at least an eDP panel (which gets wrapped into panel-bridge).
  	 *
-	 * No external bridges are expected for the DisplayPort connector,
-	 * it is physically present in a form of a DP or USB-C connector.
+	 * For DisplayPort interfaces external bridges are optional, so
+	 * silently ignore an error if one is not present (-ENODEV).
  	 */
-	if (connector_type == DRM_MODE_CONNECTOR_eDP) {
-		rc = dp_parser_find_next_bridge(parser);
-		if (rc) {
-			DRM_ERROR("DP: failed to find next bridge\n");
+	rc = dp_parser_find_next_bridge(parser);
+	if (rc == -ENODEV) {
+		if (connector_type == DRM_MODE_CONNECTOR_eDP) {
+			DRM_ERROR("eDP: next bridge is not present\n");
  			return rc;
  		}
+	} else if (rc) {
+		if (rc != -EPROBE_DEFER)
+			DRM_ERROR("DP: error parsing next bridge: %d\n", rc);
+		return rc;
  	}

How is this silently ignoring?

static int dp_display_bind(struct device *dev, struct device *master,
               void *data)
{
    int rc = 0;
    struct dp_display_private *dp = dev_get_dp_display_private(dev);
    struct msm_drm_private *priv = dev_get_drvdata(master);
    struct drm_device *drm = priv->dev;

    dp->dp_display.drm_dev = drm;
    priv->dp[dp->id] = &dp->dp_display;

    rc = dp->parser->parse(dp->parser, dp->dp_display.connector_type);
    if (rc) {
        DRM_ERROR("device tree parsing failed\n");
        goto end;
    }

dp_display_bind will still fail if a bridge is not found.

If supplying a bridge is optional even this should succeed right?

/* Map the corresponding regulator information according to



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux