Add support for Samsung Galaxy Book2 (W737) tablets.
Currently working features:
- Bootloader preconfigured display at 1280p
- UFS
- Wacom Digitizer
- Two USB 3 ports
- Sound
- Bluetooth
- Wi-Fi
Signed-off-by: Xilin Wu <wuxilin123@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +-
.../boot/dts/qcom/sdm850-samsung-w737.dts | 748 ++++++++++++++++++
3 files changed, 750 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index f7232052d286..5daef0e8011f 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -104,6 +104,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akatsuki.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-apollo.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index cfdeaa81f1bb..11ca5c636404 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1967,7 +1967,7 @@ uart15: serial@a9c000 {
};
};
- system-cache-controller@1100000 {
+ llcc: system-cache-controller@1100000 {
compatible = "qcom,sdm845-llcc";
reg = <0 0x01100000 0 0x200000>, <0 0x01300000 0 0x50000>;
reg-names = "llcc_base", "llcc_broadcast_base";
diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
new file mode 100644
index 000000000000..2a552d817b03
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
@@ -0,0 +1,748 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Samsung Galaxy Book2
+ *
+ * Copyright (c) 2022, Xilin Wu <strongtz@xxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include "sdm850.dtsi"
+#include "pm8998.dtsi"
+
+/*
+ * Update following upstream (sdm845.dtsi) reserved
+ * memory mappings for firmware loading to succeed
+ */
+/delete-node/ &qseecom_mem;
+/delete-node/ &wlan_msa_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &mpss_region;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &venus_mem;
+/delete-node/ &mba_region;
+/delete-node/ &spss_mem;
+
+/ {
+ model = "Samsung Galaxy Book2";
+ compatible = "samsung,w737", "qcom,sdm845";
+ chassis-type = "convertible";
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ // Firmware initialized the display at 1280p instead of 1440p
+ framebuffer0: framebuffer@80400000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x80400000 0 (1920 * 1280 * 4)>;
+ width = <1920>;
+ height = <1280>;
+ stride = <(1920 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+
+ aliases {
+ hsuart0 = &uart6;
+ };
+
+ /* Reserved memory changes */
+ reserved-memory {
+ /* Bootloader display framebuffer region */
+ cont_splash_mem: memory@80400000 {
+ reg = <0x0 0x80400000 0x0 0x960000>;
+ no-map;
+ };
+
+ qseecom_mem: memory@8b500000 {
+ reg = <0 0x8b500000 0 0xa00000>;
+ no-map;
+ };
+
+ wlan_msa_mem: memory@8c400000 {
+ reg = <0 0x8c400000 0 0x100000>;
+ no-map;
+ };
+
+ slpi_mem: memory@8c500000 {
+ reg = <0 0x8c500000 0 0x1200000>;
+ no-map;
+ };
+
+ ipa_fw_mem: memory@8d700000 {
+ reg = <0 0x8d700000 0 0x100000>;
+ no-map;
+ };
+
+ gpu_mem: memory@8d800000 {
+ reg = <0 0x8d800000 0 0x5000>;
+ no-map;
+ };
+
+ mpss_region: memory@8e000000 {
+ reg = <0 0x8e000000 0 0x8000000>;
+ no-map;
+ };
+
+ adsp_mem: memory@96000000 {
+ reg = <0 0x96000000 0 0x2000000>;
+ no-map;
+ };
+
+ cdsp_mem: memory@98000000 {
+ reg = <0 0x98000000 0 0x800000>;
+ no-map;
+ };
+
+ venus_mem: memory@98800000 {
+ reg = <0 0x98800000 0 0x500000>;
+ no-map;
+ };
+
+ mba_region: memory@98d00000 {
+ reg = <0 0x98d00000 0 0x200000>;
+ no-map;
+ };
+
+ spss_mem: memory@98f00000 {
+ reg = <0 0x98f00000 0 0x100000>;
+ no-map;
+ };
+ };
+};
+
+&adsp_pas {
+ firmware-name = "qcom/samsung/w737/qcadsp850.mbn";
+ status = "okay";
+};
+
+&apps_rsc {
+ pm8998-rpmh-regulators {
+ compatible = "qcom,pm8998-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+
+ vreg_s2a_1p125: smps2 {
+ };
+
+ vreg_s3a_1p35: smps3 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s4a_1p8: smps4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5a_2p04: smps5 {
+ regulator-min-microvolt = <2040000>;
+ regulator-max-microvolt = <2040000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s7a_1p025: smps7 {
+ };
+
+ vdd_qusb_hs0:
+ vdda_hp_pcie_core:
+ vdda_mipi_csi0_0p9:
+ vdda_mipi_csi1_0p9:
+ vdda_mipi_csi2_0p9:
+ vdda_mipi_dsi0_pll:
+ vdda_mipi_dsi1_pll:
+ vdda_qlink_lv:
+ vdda_qlink_lv_ck:
+ vdda_qrefs_0p875:
+ vdda_pcie_core:
+ vdda_pll_cc_ebi01:
+ vdda_pll_cc_ebi23:
+ vdda_sp_sensor:
+ vdda_ufs1_core:
+ vdda_ufs2_core:
+ vdda_usb1_ss_core:
+ vdda_usb2_ss_core:
+ vreg_l1a_0p875: ldo1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_10:
+ vreg_l2a_1p2: ldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l3a_1p0: ldo3 {
+ };
+
+ vdd_wcss_cx:
+ vdd_wcss_mx:
+ vdda_wcss_pll:
+ vreg_l5a_0p8: ldo5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_13:
+ vreg_l6a_1p8: ldo6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8a_1p2: ldo8 {
+ };
+
+ vreg_l9a_1p8: ldo9 {
+ };
+
+ vreg_l10a_1p8: ldo10 {
+ };
+
+ vreg_l11a_1p0: ldo11 {
+ };
+
+ vdd_qfprom:
+ vdd_qfprom_sp:
+ vdda_apc1_cs_1p8:
+ vdda_gfx_cs_1p8:
+ vdda_qrefs_1p8:
+ vdda_qusb_hs0_1p8:
+ vddpx_11:
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_2:
+ vreg_l13a_2p95: ldo13 {
+ };
+
+ vreg_l14a_1p88: ldo14 {
+ regulator-min-microvolt = <1880000>;
+ regulator-max-microvolt = <1880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l15a_1p8: ldo15 {
+ };
+
+ vreg_l16a_2p7: ldo16 {
+ };
+
+ vreg_l17a_1p3: ldo17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18a_1p8: ldo18 {
+ };
+
+ vreg_l19a_3p0: ldo19 {
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3108000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l20a_2p95: ldo20 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l21a_2p95: ldo21 {
+ };
+
+ vreg_l22a_2p85: ldo22 {
+ };
+
+ vreg_l23a_3p3: ldo23 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_qusb_hs0_3p1:
+ vreg_l24a_3p075: ldo24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3083000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l25a_3p3: ldo25 {
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3112000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_hp_pcie_1p2:
+ vdda_hv_ebi0:
+ vdda_hv_ebi1:
+ vdda_hv_ebi2:
+ vdda_hv_ebi3:
+ vdda_mipi_csi_1p25:
+ vdda_mipi_dsi0_1p2:
+ vdda_mipi_dsi1_1p2:
+ vdda_pcie_1p2:
+ vdda_ufs1_1p2:
+ vdda_ufs2_1p2:
+ vdda_usb1_ss_1p2:
+ vdda_usb2_ss_1p2:
+ vreg_l26a_1p2: ldo26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1208000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l28a_3p0: ldo28 {
+ };
+
+ vreg_lvs1a_1p8: lvs1 {
+ };
+
+ vreg_lvs2a_1p8: lvs2 {
+ };
+ };
+};
+
+&cdsp_pas {
+ firmware-name = "qcom/samsung/w737/qccdsp850.mbn";
+ status = "okay";
+};
+
+&gcc {
+ protected-clocks = <GCC_QSPI_CORE_CLK>,
+ <GCC_QSPI_CORE_CLK_SRC>,
+ <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <GCC_LPASS_Q6_AXI_CLK>,
+ <GCC_LPASS_SWAY_CLK>;
+};
+
+&i2c10 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* SN65DSI86 @ 0x2c */
+ /* The panel requires dual DSI, which is not supported by the bridge driver */
+};
+
+&i2c11 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* HID-I2C Touchscreen @ 0x20 */
+};
+
+&i2c15 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ digitizer@9 {
+ compatible = "wacom,w9013", "hid-over-i2c";
+ reg = <0x9>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>;
+
+ post-power-on-delay-ms = <120>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+
+ hid-descr-addr = <0x1>;
+ };
+};
+
+&ipa {
+ status = "okay";
+ memory-region = <&ipa_fw_mem>;
+ firmware-name = "qcom/samsung/w737/ipa_fws.elf";
+};
+
+/* No idea why it causes an SError when enabled */
+&llcc {
+ status = "disabled";
+};
+
+&mss_pil {
+ status = "okay";
+ firmware-name = "qcom/samsung/w737/qcdsp1v2850.mbn", "qcom/samsung/w737/qcdsp2850.mbn";
+};
+
+&qup_i2c10_default {
+ pinconf {
+ pins = "gpio55", "gpio56";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&qup_i2c11_default {
+ pinconf {
+ pins = "gpio31", "gpio32";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&qup_i2c12_default {
+ drive-strength = <2>;
+ bias-disable;
+};
+
+&qup_uart6_default {
+ pinmux {
+ pins = "gpio45", "gpio46", "gpio47", "gpio48";
+ function = "qup6";
+ };
+
+ cts {
+ pins = "gpio45";
+ bias-pull-down;
+ };
+
+ rts-tx {
+ pins = "gpio46", "gpio47";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio48";
+ bias-pull-up;
+ };
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&q6asmdai {
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+};
+
+&sound {
+ compatible = "qcom,sdm845-sndcard";
+ model = "Samsung-W737";
+
+ audio-routing =
+ "RX_BIAS", "MCLK",
+ "AMIC2", "MIC BIAS2",
+ "SpkrLeft IN", "SPK1 OUT",
+ "SpkrRight IN", "SPK2 OUT",
+ "MM_DL1", "MultiMedia1 Playback",
+ "MM_DL3", "MultiMedia3 Playback",
+ "MultiMedia2 Capture", "MM_UL2";
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ mm2-dai-link {
+ link-name = "MultiMedia2";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
+ };
+
+ mm3-dai-link {
+ link-name = "MultiMedia3";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
+ slim-dai-link {
+ link-name = "SLIM Playback";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
+ };
+ };
+
+ slimcap-dai-link {
+ link-name = "SLIM Capture";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 1>;
+ };
+ };
+
+ slim-wcd-dai-link {
+ link-name = "SLIM WCD Playback";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_1_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 2>;
+ };
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 6>, <85 4>;
+
+ pen_irq_l: pen-irq-l {
+ pinmux {
+ pins = "gpio119";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio119";
+ bias-disable;
+ };
+ };
+
+ pen_pdct_l: pen-pdct-l {
+ pinmux {
+ pins = "gpio124";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio124";
+ bias-disable;
+ drive-strength = <2>;
+ output-high;
+ };
+ };
+
+ pen_rst_l: pen-rst-l {
+ pinmux {
+ pins = "gpio21";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio21";
+ bias-disable;
+ drive-strength = <2>;
+
+ /*
+ * The pen driver doesn't currently support
+ * driving this reset line. By specifying
+ * output-high here we're relying on the fact
+ * that this pin has a default pulldown at boot
+ * (which makes sure the pen was in reset if it
+ * was powered) and then we set it high here to
+ * take it out of reset. Better would be if the
+ * pen driver could control this and we could
+ * remove "output-high" here.
+ */
+ output-high;
+ };
+ };
+
+ wcd_intr_default: wcd_intr_default {
+ pins = "gpio54";
+ function = "gpio";
+
+ input-enable;
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+};
+
+&uart6 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+
+ vddio-supply = <&vreg_s4a_1p8>;
+ vddxo-supply = <&vreg_l7a_1p8>;
+ vddrf-supply = <&vreg_l17a_1p3>;
+ vddch0-supply = <&vreg_l25a_3p3>;
+ vddch1-supply = <&vreg_l23a_3p3>;
+ max-speed = <3200000>;
+ };
+};
+
+&ufs_mem_hc {
+ status = "okay";
+
+ reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l20a_2p95>;
+ vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_ufs1_core>;
+ vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+
+ vdd-supply = <&vdda_usb1_ss_core>;
+ vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+ vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+ qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+ qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+ vdda-pll-supply = <&vdda_usb1_ss_core>;
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_2_hsphy {
+ status = "okay";
+
+ vdd-supply = <&vdda_usb2_ss_core>;
+ vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+ vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+};
+
+&usb_2_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+ vdda-pll-supply = <&vdda_usb2_ss_core>;
+};
+
+&venus {
+ status = "okay";
+ firmware-name = "qcom/samsung/w737/qcvss850.mbn";
+};
+
+&wcd9340{
+ pinctrl-0 = <&wcd_intr_default>;
+ pinctrl-names = "default";
+ clock-names = "extclk";
+ clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+ reset-gpios = <&tlmm 64 0>;
+ vdd-buck-supply = <&vreg_s4a_1p8>;
+ vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+ vdd-tx-supply = <&vreg_s4a_1p8>;
+ vdd-rx-supply = <&vreg_s4a_1p8>;
+ vdd-io-supply = <&vreg_s4a_1p8>;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+
+ swm: swm@c85 {
+ left_spkr: wsa8810-left{
+ compatible = "sdw10217211000";
+ reg = <0 3>;
+ powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
+ #thermal-sensor-cells = <0>;
+ sound-name-prefix = "SpkrLeft";
+ #sound-dai-cells = <0>;
+ };
+
+ right_spkr: wsa8810-right{
+ compatible = "sdw10217211000";
+ powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+ reg = <0 4>;
+ #thermal-sensor-cells = <0>;
+ sound-name-prefix = "SpkrRight";
+ #sound-dai-cells = <0>;
+ };
+ };
+};
+
+&wifi {
+ status = "okay";
+
+ vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+ vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+ vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+
+ qcom,snoc-host-cap-8bit-quirk;
+};
--
2.25.1
