On Fri, Feb 18, 2022 at 01:29:38AM +0100, Ansuel Smith wrote: > This try to complete the ipq8064 dtsi and introduce 2 new dtsi > ipq8064-v2 and ipq8065. While some node are still missing (cpufreq node, > l2 scale node, fab scale node) this would add most of the missing node > to make ipq8064 actually usable. > > Some of the changes are the fix for the pci IO that cause any secondary > wifi card with ath10k to fail init. > Adds regulators definition for RPM. > Adds many missing gsbi nodes used by all the devices. > Enable the usb phy by default as they are actually enabled internally by > xlate only if the dwc3 driver is used. > Add opp table and declare idle state for ipq8064. > Fix some dtc warning. > > This also add the ipq8064-v2.0 dtsi and the ipq8065 dtsi used by more > recent devices based on this SoC. A couple of comments directly on 2 patches, but otherwise for the set: Tested-by: Jonathan McDowell <noodles@xxxxxxxx> > v2: > - Added missing patch > - Added additional gsbi6 spi > - Added extra description for L2 cache opp > - Fxied smb208 enabled by default that is problematic for rb3011 devices > > Ansuel Smith (18): > ARM: dts: qcom: add multiple missing pin definition for ipq8064 > ARM: dts: qcom: add gsbi6 missing definition for ipq8064 > ARM: dts: qcom: add missing rpm regulators and cells for ipq8064 > ARM: dts: qcom: disable smb208 regulators for ipq8064-rb3011 > ARM: dts: qcom: add missing snps,dwmac compatible for gmac ipq8064 > ARM: dts: qcom: enable usb phy by default for ipq8064 > ARM: dts: qcom: reduce pci IO size to 64K for ipq8064 > ARM: dts: qcom: fix dtc warning for missing #address-cells for ipq8064 > ARM: dts: qcom: add smem node for ipq8064 > ARM: dts: qcom: add saw for l2 cache and kraitcc for ipq8064 > ARM: dts: qcom: add sic non secure node for ipq8064 > ARM: dts: qcom: fix and add some missing gsbi node for ipq8064 > ARM: dts: qcom: add opp table for cpu and l2 for ipq8064 > ARM: dts: qcom: add speedbin efuse nvmem binding > ARM: dts: qcom: add multiple missing binding for cpu and l2 for > ipq8064 > ARM: dts: qcom: remove redundant binding from ipq8064 rb3011 dts > ARM: dts: qcom: add ipq8064-v2.0 dtsi > ARM: dts: qcom: add ipq8065 dtsi > > arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 21 +- > arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi | 70 ++++ > arch/arm/boot/dts/qcom-ipq8064.dtsi | 375 +++++++++++++++++++++- > arch/arm/boot/dts/qcom-ipq8065.dtsi | 168 ++++++++++ > 4 files changed, 603 insertions(+), 31 deletions(-) > create mode 100644 arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi > create mode 100644 arch/arm/boot/dts/qcom-ipq8065.dtsi > > -- > 2.34.1 > J. -- "evilwm - we sold our souls to the window manager" -- http://www.6809.org.uk/evilwm/
