[PATCH 2/3] drm/msm/a6xx: Add speedbin support for A619 GPU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There are various SKUs of A619, ranging from 565 MHz to 850 MHz, depending
on the bin. Add support for distinguishing them, so that proper frequency
ranges can be applied, depending on the HW.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
 drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
index ed9abb2d5e5c..019df7a226b7 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -1804,12 +1804,30 @@ static u32 a618_get_speed_bin(u32 fuse)
 	return UINT_MAX;
 }
 
+static u32 a619_get_speed_bin(u32 fuse)
+{
+	if (fuse == 0)
+		return 0;
+	else if (fuse == 120)
+		return 4;
+	else if (fuse == 138)
+		return 3;
+	else if (fuse == 169)
+		return 2;
+	else if (fuse == 180)
+		return 1;
+
+	return UINT_MAX;
+}
+
 static u32 fuse_to_supp_hw(struct device *dev, struct adreno_rev rev, u32 fuse)
 {
 	u32 val = UINT_MAX;
 
 	if (adreno_cmp_rev(ADRENO_REV(6, 1, 8, ANY_ID), rev))
 		val = a618_get_speed_bin(fuse);
+	else if (adreno_cmp_rev(ADRENO_REV(6, 1, 9, ANY_ID), rev))
+		val = a619_get_speed_bin(fuse);
 
 	if (val == UINT_MAX) {
 		DRM_DEV_ERROR(dev,
-- 
2.35.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux