[PATCH v2 00/10] Initial MSM8953 & Fairphone 3 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series adds initial support for MSM8953 (and SDM632 which is based
on MSM8953) and the Fairphone 3 smartphone.

Only relatively basic functionality is supported like storage, volume
keys and USB.

There is currently close-to-mainline support for other components for
this SoC including GPU, WiFi and audio, this series adds only basic
support so that the other components can start getting upstreamed
easier.

Changes in v2:
- rebase on linux-next and drop already applied patches
- drop msm8953-pm8953.dtsi patch: integrate changes into FP3 patch
- for individual patches for other changes

Luca Weiss (7):
  dt-bindings: mfd: qcom,tcsr: Document msm8953 compatible
  dt-bindings: thermal: tsens: Add msm8953 compatible
  dt-bindings: usb: qcom,dwc3: Add msm8953 compatible
  dt-bindings: arm: cpus: Add Kryo 250 CPUs
  rpmsg: smd: allow opening rpm_requests even if already opened
  dt-bindings: arm: qcom: Document sdm632 and fairphone,fp3 board
  arm64: dts: qcom: sdm632: Add device tree for Fairphone 3

Vladimir Lypak (3):
  arm64: dts: qcom: Add MSM8953 device tree
  arm64: dts: qcom: Add PM8953 PMIC
  arm64: dts: qcom: Add SDM632 device tree

 .../devicetree/bindings/arm/cpus.yaml         |    1 +
 .../devicetree/bindings/arm/qcom.yaml         |    6 +
 .../devicetree/bindings/mfd/qcom,tcsr.txt     |    1 +
 .../bindings/thermal/qcom-tsens.yaml          |    1 +
 .../devicetree/bindings/usb/qcom,dwc3.yaml    |    1 +
 arch/arm64/boot/dts/qcom/Makefile             |    1 +
 arch/arm64/boot/dts/qcom/msm8953.dtsi         | 1326 +++++++++++++++++
 arch/arm64/boot/dts/qcom/pm8953.dtsi          |   90 ++
 .../boot/dts/qcom/sdm632-fairphone-fp3.dts    |  183 +++
 arch/arm64/boot/dts/qcom/sdm632.dtsi          |   81 +
 drivers/rpmsg/qcom_smd.c                      |    5 +-
 11 files changed, 1695 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8953.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pm8953.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sdm632.dtsi

-- 
2.35.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux