On Fri, Feb 18, 2022 at 01:29:54AM +0100, Ansuel Smith wrote:
> Mdio0_pins are now declared in ipq8064 dtsi. Usb phy are enabled by
> default.
>
> Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
> ---
> arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 17 -----------------
> 1 file changed, 17 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
> index 0982b6214fb7..ddc9cc49ab60 100644
> --- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
> +++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
> @@ -259,10 +259,6 @@ &gsbi7_serial {
> status = "okay";
> };
>
> -&hs_phy_1 {
> - status = "okay";
> -};
> -
> &nand {
> status = "okay";
>
> @@ -309,15 +305,6 @@ mux {
> };
> };
>
> - mdio0_pins: mdio0_pins {
> - mux {
> - pins = "gpio0", "gpio1";
> - function = "gpio";
> - drive-strength = <8>;
> - bias-disable;
> - };
> - };
> -
This sets the pins to "gpio". Your earlier patch sets them to "mdio", so
removing this will break MDIO0 on the RB3011. It's likely that your
fixes for MDIO/QCA8K mean that the RB3011 can be switch to use the MDIO
driver rather than mdio-gpio, but that will need tested and this change
alone will definitely break things.
> mdio1_pins: mdio1_pins {
> mux {
> pins = "gpio10", "gpio11";
> @@ -358,10 +345,6 @@ mux {
> };
> };
>
> -&ss_phy_1 {
> - status = "okay";
> -};
> -
> &usb3_1 {
> pinctrl-0 = <&usb1_pwr_en_pins>;
> pinctrl-names = "default";
> --
> 2.34.1
>
J.
--
/-\ | Even the Evening Herald slags me
|@/ Debian GNU/Linux Developer | off.
\- |
