[Resend PATCH V1 2/2] Revert "arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This reverts commit a0c68e493007a8c72b6b00f6ac95590a86edc937.

Revert all the changes to add the Embedded USB Debugger(EUD) Node
in the device tree, the connector node and also changes to usb2 Node
associated with this.

Signed-off-by: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 36 ------------------------------------
 1 file changed, 36 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 96917fe..937c2e0 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2583,12 +2583,6 @@
 				phys = <&usb_2_hsphy>;
 				phy-names = "usb2-phy";
 				maximum-speed = "high-speed";
-				usb-role-switch;
-				port {
-					usb2_role_switch: endpoint {
-						remote-endpoint = <&eud_ep>;
-					};
-				};
 			};
 		};
 
@@ -2630,36 +2624,6 @@
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		eud: eud@88e0000 {
-			compatible = "qcom,sc7280-eud","qcom,eud";
-			reg = <0 0x88e0000 0 0x2000>,
-			      <0 0x88e2000 0 0x1000>;
-			interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
-			ports {
-				port@0 {
-					eud_ep: endpoint {
-						remote-endpoint = <&usb2_role_switch>;
-					};
-				};
-				port@1 {
-					eud_con: endpoint {
-						remote-endpoint = <&con_eud>;
-					};
-				};
-			};
-		};
-
-		eud_typec: connector {
-			compatible = "usb-c-connector";
-			ports {
-				port@0 {
-					con_eud: endpoint {
-						remote-endpoint = <&eud_con>;
-					};
-				};
-			};
-		};
-
 		nsp_noc: interconnect@a0c0000 {
 			reg = <0 0x0a0c0000 0 0x10000>;
 			compatible = "qcom,sc7280-nsp-noc";
-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux