[PATCH v2 04/18] ARM: dts: qcom: disable smb208 regulators for ipq8064-rb3011

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Mikrotik RB3011 have a special configuration where the regulators are
not the common smb208 controlled by RPM but they use a TPS563900
controlled via i2c. Disable the smb208 for this specific device.

Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
---
 arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index 596d129d4a95..0982b6214fb7 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -216,6 +216,10 @@ led@7 {
 	};
 };
 
+&smb208_regulators {
+	status = "disabled";
+}
+
 &adm_dma {
 	status = "okay";
 };
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux