Re: [PATCH v3 02/10] coresight: Use bitmap to assign trace id to the sources

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wed, 9 Feb 2022 at 10:57, Mao Jinlong <quic_jinlmao@xxxxxxxxxxx> wrote:
>
> Except from STM and ETM/ETE, there could be other sources. Each
> source needs a unique trace id. Define a bitmap for the trace ids.
> The position of each bit represents trace id of the source.
>
> Signed-off-by: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
> ---
>  drivers/hwtracing/coresight/coresight-core.c | 48 ++++++++++++++++++++
>  include/linux/coresight-pmu.h                | 11 +++++
>  2 files changed, 59 insertions(+)
>
> diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c
> index a90097f88425..6cb55c3f41d5 100644
> --- a/drivers/hwtracing/coresight/coresight-core.c
> +++ b/drivers/hwtracing/coresight/coresight-core.c
> @@ -16,6 +16,7 @@
>  #include <linux/mutex.h>
>  #include <linux/clk.h>
>  #include <linux/coresight.h>
> +#include <linux/coresight-pmu.h>

see my comment below about using coresigh-priv.h

>  #include <linux/of_platform.h>
>  #include <linux/delay.h>
>  #include <linux/pm_runtime.h>
> @@ -25,8 +26,11 @@
>  #include "coresight-syscfg.h"
>
>  static DEFINE_MUTEX(coresight_mutex);
> +static DEFINE_MUTEX(coresight_id_mutex);
>  static DEFINE_PER_CPU(struct coresight_device *, csdev_sink);
>
> +static DECLARE_BITMAP(coresight_trace_id, CORESIGHT_TRACE_ID_NUM);
> +
>  /*
>   * Use IDR to map the hash length of the source's device name
>   * to the pointer of path for the source
> @@ -51,6 +55,48 @@ struct coresight_node {
>  const u32 coresight_barrier_pkt[4] = {0x7fffffff, 0x7fffffff, 0x7fffffff, 0x7fffffff};
>  EXPORT_SYMBOL_GPL(coresight_barrier_pkt);
>
> +/* Init the coresight_trace_id bit map. */
> +static void coresight_init_trace_id(void)
> +{
> +       int i;
> +
> +       /* Trace id 0 is invalid. */
> +       set_bit(CORESIGHT_TRACE_ID_0, coresight_trace_id);
> +       /* Trace id 1 is fixed for STM. */
> +       set_bit(CORESIGHT_TRACE_ID_1, coresight_trace_id);
> +       /* Trace id from 112 to 127 are reserved. */
> +       for (i = CORESIGHT_TRACE_ID_112; i <= CORESIGHT_TRACE_ID_127; i++)
> +               set_bit(i, coresight_trace_id);
> +       /* Skip the trace ids of ETM/ETE. */
> +       for (i = 0; i <= cpumask_last(cpu_possible_mask); i++)
> +               set_bit(coresight_get_trace_id(i), coresight_trace_id);
> +
> +}
> +
> +/*
> + * Return the first zero bit position of bitmap coresight_trace_id
> + * as source's trace id.
> + *
> + */
> +int coresight_get_system_trace_id(void)
> +{
> +       int id;
> +
> +       mutex_lock(&coresight_id_mutex);
> +       id = find_first_zero_bit(coresight_trace_id, CORESIGHT_TRACE_ID_NUM);
> +       /* If no zero bit is found, return error value. */
> +       if (id == CORESIGHT_TRACE_ID_NUM) {
> +               mutex_unlock(&coresight_id_mutex);
> +               return -EINVAL;
> +       }
> +
> +       set_bit(id, coresight_trace_id);
> +       mutex_unlock(&coresight_id_mutex);
> +
> +       return id;
> +}
> +EXPORT_SYMBOL(coresight_get_system_trace_id);
> +
>  static const struct cti_assoc_op *cti_assoc_ops;
>
>  void coresight_set_cti_ops(const struct cti_assoc_op *cti_op)
> @@ -1750,6 +1796,8 @@ static int __init coresight_init(void)
>                 return 0;
>
>         etm_perf_exit();
> +
> +       coresight_init_trace_id();
>  exit_bus_unregister:
>         bus_unregister(&coresight_bustype);
>         return ret;
> diff --git a/include/linux/coresight-pmu.h b/include/linux/coresight-pmu.h
> index 4ac5c081af93..1e2c5ca4c6e6 100644
> --- a/include/linux/coresight-pmu.h
> +++ b/include/linux/coresight-pmu.h
> @@ -32,6 +32,14 @@
>  #define ETM4_CFG_BIT_RETSTK    12
>  #define ETM4_CFG_BIT_VMID_OPT  15
>

The following additional defines and function should appear in coresight-priv.h
The coresight-pmu.h file contains data for the interface between the
drivers and perf.


> +/* Coresight component supports 7 bits trace id. */

additional comment here to explain that 0, 0x70- 0x7F IDs are reserved
by the architecture, 1 is default for STM

> +#define CORESIGHT_TRACE_ID_NUM 128
> +
> +#define CORESIGHT_TRACE_ID_0   0
> +#define CORESIGHT_TRACE_ID_1   1
> +#define CORESIGHT_TRACE_ID_112 112
> +#define CORESIGHT_TRACE_ID_127 127
> +

can we have these names a little more descriptive -
e.g.
CORESIGHT_TRACE_ID_0_RES 0
CORESIGHT_TRACE_ID_STM  1
CORESIGHT_TRACE_ID_RANGE_LO_RES 0x70
CORESIGHT_TRACE_ID_RANGE_HI_RES  0x7F

Additionally - now we are declaring a #define for the STM ID - it
would be better to use that in coresight-stm.c stm_init_default_data()
to set the trace id for the STM.

Regards

Mike

>  static inline int coresight_get_trace_id(int cpu)
>  {
>         /*
> @@ -43,4 +51,7 @@ static inline int coresight_get_trace_id(int cpu)
>         return (CORESIGHT_ETM_PMU_SEED + (cpu * 2));
>  }
>
> +/* Get the trace id for the sources except from STM, ETM/ETE. */
> +extern int coresight_get_system_trace_id(void);
> +
>  #endif
> --
> 2.17.1
>


-- 
Mike Leach
Principal Engineer, ARM Ltd.
Manchester Design Centre. UK



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux