The only clock for which we set the rate is the "stream_pixel". Rather
than storing the rate and then setting it by looping over all the
clocks, set the clock rate directly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/gpu/drm/msm/dp/dp_clk_util.c | 33 ----------------------------
drivers/gpu/drm/msm/dp/dp_clk_util.h | 9 --------
drivers/gpu/drm/msm/dp/dp_ctrl.c | 2 +-
drivers/gpu/drm/msm/dp/dp_parser.c | 7 ------
drivers/gpu/drm/msm/dp/dp_power.c | 10 ---------
5 files changed, 1 insertion(+), 60 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_clk_util.c b/drivers/gpu/drm/msm/dp/dp_clk_util.c
index 44a4fc59ff31..85abed31c68b 100644
--- a/drivers/gpu/drm/msm/dp/dp_clk_util.c
+++ b/drivers/gpu/drm/msm/dp/dp_clk_util.c
@@ -51,39 +51,6 @@ int msm_dss_get_clk(struct device *dev, struct dss_clk *clk_arry, int num_clk)
return rc;
}
-int msm_dss_clk_set_rate(struct dss_clk *clk_arry, int num_clk)
-{
- int i, rc = 0;
-
- for (i = 0; i < num_clk; i++) {
- if (clk_arry[i].clk) {
- if (clk_arry[i].type != DSS_CLK_AHB) {
- DEV_DBG("%pS->%s: '%s' rate %ld\n",
- __builtin_return_address(0), __func__,
- clk_arry[i].clk_name,
- clk_arry[i].rate);
- rc = clk_set_rate(clk_arry[i].clk,
- clk_arry[i].rate);
- if (rc) {
- DEV_ERR("%pS->%s: %s failed. rc=%d\n",
- __builtin_return_address(0),
- __func__,
- clk_arry[i].clk_name, rc);
- break;
- }
- }
- } else {
- DEV_ERR("%pS->%s: '%s' is not available\n",
- __builtin_return_address(0), __func__,
- clk_arry[i].clk_name);
- rc = -EPERM;
- break;
- }
- }
-
- return rc;
-}
-
int msm_dss_enable_clk(struct dss_clk *clk_arry, int num_clk, int enable)
{
int i, rc = 0;
diff --git a/drivers/gpu/drm/msm/dp/dp_clk_util.h b/drivers/gpu/drm/msm/dp/dp_clk_util.h
index 067bf87f3d97..c3d59b5017a9 100644
--- a/drivers/gpu/drm/msm/dp/dp_clk_util.h
+++ b/drivers/gpu/drm/msm/dp/dp_clk_util.h
@@ -13,17 +13,9 @@
#define DEV_WARN(fmt, args...) pr_warn(fmt, ##args)
#define DEV_ERR(fmt, args...) pr_err(fmt, ##args)
-enum dss_clk_type {
- DSS_CLK_AHB, /* no set rate. rate controlled through rpm */
- DSS_CLK_PCLK,
-};
-
struct dss_clk {
struct clk *clk; /* clk handle */
char clk_name[32];
- enum dss_clk_type type;
- unsigned long rate;
- unsigned long max_rate;
};
struct dss_module_power {
@@ -33,6 +25,5 @@ struct dss_module_power {
int msm_dss_get_clk(struct device *dev, struct dss_clk *clk_arry, int num_clk);
void msm_dss_put_clk(struct dss_clk *clk_arry, int num_clk);
-int msm_dss_clk_set_rate(struct dss_clk *clk_arry, int num_clk);
int msm_dss_enable_clk(struct dss_clk *clk_arry, int num_clk, int enable);
#endif /* __DP_CLK_UTIL_H__ */
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index 07f6bf7e1acb..8e6361dedd77 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1315,7 +1315,7 @@ static void dp_ctrl_set_clock_rate(struct dp_ctrl_private *ctrl,
DRM_DEBUG_DP("setting rate=%lu on clk=%s\n", rate, name);
if (num)
- cfg->rate = rate;
+ clk_set_rate(cfg->clk, rate);
else
DRM_ERROR("%s clock doesn't exit to set rate %lu\n",
name, rate);
diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c b/drivers/gpu/drm/msm/dp/dp_parser.c
index a7acc23f742b..4f2d80bc0671 100644
--- a/drivers/gpu/drm/msm/dp/dp_parser.c
+++ b/drivers/gpu/drm/msm/dp/dp_parser.c
@@ -237,14 +237,12 @@ static int dp_parser_clock(struct dp_parser *parser)
struct dss_clk *clk =
&core_power->clk_config[core_clk_index];
strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
- clk->type = DSS_CLK_AHB;
core_clk_index++;
} else if (dp_parser_check_prefix("stream", clk_name) &&
stream_clk_index < stream_clk_count) {
struct dss_clk *clk =
&stream_power->clk_config[stream_clk_index];
strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
- clk->type = DSS_CLK_PCLK;
stream_clk_index++;
} else if (dp_parser_check_prefix("ctrl", clk_name) &&
ctrl_clk_index < ctrl_clk_count) {
@@ -252,11 +250,6 @@ static int dp_parser_clock(struct dp_parser *parser)
&ctrl_power->clk_config[ctrl_clk_index];
strlcpy(clk->clk_name, clk_name, sizeof(clk->clk_name));
ctrl_clk_index++;
- if (dp_parser_check_prefix("ctrl_link", clk_name) ||
- dp_parser_check_prefix("stream_pixel", clk_name))
- clk->type = DSS_CLK_PCLK;
- else
- clk->type = DSS_CLK_AHB;
}
}
diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c
index 893a57dd97d9..6920d787e7aa 100644
--- a/drivers/gpu/drm/msm/dp/dp_power.c
+++ b/drivers/gpu/drm/msm/dp/dp_power.c
@@ -156,16 +156,6 @@ static int dp_power_clk_set_rate(struct dp_power_private *power,
int rc = 0;
struct dss_module_power *mp = &power->parser->mp[module];
- if (module != DP_CTRL_PM) {
- if (enable) {
- rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk);
- if (rc) {
- DRM_ERROR("failed to set clks rate\n");
- return rc;
- }
- }
- }
-
rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, enable);
if (rc) {
DRM_ERROR("failed to %d clks, err: %d\n", enable, rc);
--
2.34.1
