The device contains BCM43430A0 for bluetooth. Add a node for it.
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts | 36 +++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
index 333fae435913..42467f705b26 100644
--- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
@@ -16,6 +16,7 @@ / {
aliases {
serial0 = &blsp1_uart3;
+ serial1 = &blsp1_uart4;
};
chosen {
@@ -80,6 +81,26 @@ &blsp1_uart3 {
status = "okay";
};
+&blsp1_uart4 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&blsp1_uart4_default_state>;
+
+ bluetooth {
+ compatible = "brcm,bcm43430a0-bt";
+
+ max-speed = <3000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&bluetooth_default_state>;
+
+ host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+ };
+};
+
&rpm_requests {
pm8226-regulators {
compatible = "qcom,rpm-pm8226-regulators";
@@ -254,6 +275,21 @@ &smbb {
};
&tlmm {
+ blsp1_uart4_default_state: blsp1-uart4-default-state {
+ pins = "gpio12", "gpio13", "gpio14", "gpio15";
+ function = "blsp_uart4";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ bluetooth_default_state: bluetooth-default-state {
+ pins = "gpio47", "gpio48";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
+
touch_pins: touch {
irq {
pins = "gpio17";
--
2.35.1
