Re: [v1 2/2] drm/msm/disp/dpu1: Add PSR support for eDP interface in dpu driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 12 Feb 2022 at 15:52, Vinod Polimera <quic_vpolimer@xxxxxxxxxxx> wrote:
>
> Enable PSR on eDP interface using drm self-refresh librabry.
> This patch uses a trigger from self-refresh library to enter/exit
> into PSR, when there are no updates from framework.
>
> Signed-off-by: Vinod Polimera <quic_vpolimer@xxxxxxxxxxx>
> Signed-off-by: Kalyan Thota <quic_kalyant@xxxxxxxxxxx>

The S-O-B of the sender should come last. Please change the order of
the S-O-B tags.

> ---
>  drivers/gpu/drm/bridge/panel.c              | 64 +++++++++++++++++++++-----

This chunk should come in a separate patch. Please do not mix drm/msm
patches with the generic code.

>  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c    | 30 +++++++++---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 71 ++++++++++++++++++++++++++---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     |  2 +-
>  4 files changed, 142 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/panel.c b/drivers/gpu/drm/bridge/panel.c
> index b32295a..c440546 100644
> --- a/drivers/gpu/drm/bridge/panel.c
> +++ b/drivers/gpu/drm/bridge/panel.c
> @@ -102,31 +102,71 @@ static void panel_bridge_detach(struct drm_bridge *bridge)
>                 drm_connector_cleanup(connector);
>  }
>
> -static void panel_bridge_pre_enable(struct drm_bridge *bridge)
> +static void panel_bridge_pre_enable(struct drm_bridge *bridge,
> +               struct drm_bridge_state *old_bridge_state)
>  {
>         struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge);
> -
> +       struct drm_crtc *crtc;
> +       struct drm_crtc_state *cstate;
> +       int i;
> +
> +       if (old_bridge_state->base.state) {
> +               for_each_old_crtc_in_state(old_bridge_state->base.state, crtc, cstate, i) {
> +                       if (cstate->self_refresh_active && cstate->active)
> +                               return;
> +               }

Ugh. No. You will skip panel actions if _any_ of the crtc's has PSR
enabled. There might be other CRTCs in play.
Please see analogix_dp_core.c for a proper way to handle this.
Consider moving common code (e.g. getting the crtc used by the
encoder) pieces to the generic drm code.

> +       }
>         drm_panel_prepare(panel_bridge->panel);
>  }
>
> -static void panel_bridge_enable(struct drm_bridge *bridge)
> +static void panel_bridge_enable(struct drm_bridge *bridge,
> +               struct drm_bridge_state *old_bridge_state)
>  {
>         struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge);
> -
> +       struct drm_crtc *crtc;
> +       struct drm_crtc_state *cstate;
> +       int i;
> +
> +       if (old_bridge_state->base.state) {
> +               for_each_old_crtc_in_state(old_bridge_state->base.state, crtc, cstate, i) {
> +                       if (cstate->self_refresh_active)
> +                               return;
> +               }
> +       }
>         drm_panel_enable(panel_bridge->panel);
>  }
>
> -static void panel_bridge_disable(struct drm_bridge *bridge)
> +static void panel_bridge_disable(struct drm_bridge *bridge,
> +               struct drm_bridge_state *old_bridge_state)
>  {
>         struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge);
> -
> +       struct drm_crtc *crtc;
> +       struct drm_crtc_state *cstate;
> +       int i;
> +
> +       if (old_bridge_state->base.state) {
> +               for_each_new_crtc_in_state(old_bridge_state->base.state, crtc, cstate, i) {
> +                       if (cstate->self_refresh_active)
> +                               return;
> +               }
> +       }
>         drm_panel_disable(panel_bridge->panel);
>  }
>
> -static void panel_bridge_post_disable(struct drm_bridge *bridge)
> +static void panel_bridge_post_disable(struct drm_bridge *bridge,
> +               struct drm_bridge_state *old_bridge_state)
>  {
>         struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge);
> -
> +       struct drm_crtc *crtc;
> +       struct drm_crtc_state *cstate;
> +       int i;
> +
> +       if (old_bridge_state->base.state) {
> +               for_each_new_crtc_in_state(old_bridge_state->base.state, crtc, cstate, i) {
> +                       if (cstate->self_refresh_active)
> +                               return;
> +               }
> +       }
>         drm_panel_unprepare(panel_bridge->panel);
>  }
>
> @@ -141,10 +181,10 @@ static int panel_bridge_get_modes(struct drm_bridge *bridge,
>  static const struct drm_bridge_funcs panel_bridge_bridge_funcs = {
>         .attach = panel_bridge_attach,
>         .detach = panel_bridge_detach,
> -       .pre_enable = panel_bridge_pre_enable,
> -       .enable = panel_bridge_enable,
> -       .disable = panel_bridge_disable,
> -       .post_disable = panel_bridge_post_disable,
> +       .atomic_pre_enable = panel_bridge_pre_enable,
> +       .atomic_enable = panel_bridge_enable,
> +       .atomic_disable = panel_bridge_disable,
> +       .atomic_post_disable = panel_bridge_post_disable,
>         .get_modes = panel_bridge_get_modes,
>         .atomic_reset = drm_atomic_helper_bridge_reset,
>         .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index e7c9fe1..90223b8 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -18,6 +18,7 @@
>  #include <drm/drm_probe_helper.h>
>  #include <drm/drm_rect.h>
>  #include <drm/drm_vblank.h>
> +#include <drm/drm_self_refresh_helper.h>
>
>  #include "dpu_kms.h"
>  #include "dpu_hw_lm.h"
> @@ -457,7 +458,6 @@ static void _dpu_crtc_blend_setup(struct drm_crtc *crtc)
>                         mixer[i].mixer_op_mode,
>                         ctl->idx - CTL_0,
>                         mixer[i].flush_mask);
> -

Unnecessary

>                 ctl->ops.setup_blendstage(ctl, mixer[i].hw_lm->idx,
>                         &stage_cfg);
>         }
> @@ -951,6 +951,14 @@ static void dpu_crtc_disable(struct drm_crtc *crtc,
>
>         DRM_DEBUG_KMS("crtc%d\n", crtc->base.id);
>
> +       if (old_crtc_state->self_refresh_active) {
> +               drm_for_each_encoder_mask(encoder, crtc->dev,
> +                                old_crtc_state->encoder_mask) {
> +                       dpu_encoder_assign_crtc(encoder, NULL);
> +               }
> +               return;
> +       }
> +
>         /* Disable/save vblank irq handling */
>         drm_crtc_vblank_off(crtc);
>
> @@ -962,7 +970,8 @@ static void dpu_crtc_disable(struct drm_crtc *crtc,
>                  */
>                 if (dpu_encoder_get_intf_mode(encoder) == INTF_MODE_VIDEO)
>                         release_bandwidth = true;
> -               dpu_encoder_assign_crtc(encoder, NULL);
> +               if (!crtc->state->self_refresh_active)
> +                       dpu_encoder_assign_crtc(encoder, NULL);

This deserves some comments in the code

>         }
>
>         /* wait for frame_event_done completion */
> @@ -1010,6 +1019,8 @@ static void dpu_crtc_enable(struct drm_crtc *crtc,
>         struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
>         struct drm_encoder *encoder;
>         bool request_bandwidth = false;
> +       struct drm_crtc_state *old_crtc_state =
> +               drm_atomic_get_old_crtc_state(state, crtc);
>
>         pm_runtime_get_sync(crtc->dev->dev);
>
> @@ -1032,8 +1043,10 @@ static void dpu_crtc_enable(struct drm_crtc *crtc,
>         trace_dpu_crtc_enable(DRMID(crtc), true, dpu_crtc);
>         dpu_crtc->enabled = true;
>
> -       drm_for_each_encoder_mask(encoder, crtc->dev, crtc->state->encoder_mask)
> -               dpu_encoder_assign_crtc(encoder, crtc);
> +       if (!old_crtc_state->self_refresh_active) {
> +               drm_for_each_encoder_mask(encoder, crtc->dev, crtc->state->encoder_mask)
> +                       dpu_encoder_assign_crtc(encoder, crtc);
> +       }

This deserves some comments in the code

>
>         /* Enable/restore vblank irq handling */
>         drm_crtc_vblank_on(crtc);
> @@ -1069,7 +1082,7 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc,
>
>         pstates = kzalloc(sizeof(*pstates) * DPU_STAGE_MAX * 4, GFP_KERNEL);
>
> -       if (!crtc_state->enable || !crtc_state->active) {
> +       if (!crtc_state->enable || !crtc_state->active || crtc_state->self_refresh_active) {

This does not seem correct to me. According to the docs: "When in self
refresh mode, the crtc_state->active value will be false, since the
CRTC is off."

>                 DRM_DEBUG_ATOMIC("crtc%d -> enable %d, active %d, skip atomic_check\n",
>                                 crtc->base.id, crtc_state->enable,
>                                 crtc_state->active);
> @@ -1497,7 +1510,7 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane,
>  {
>         struct drm_crtc *crtc = NULL;
>         struct dpu_crtc *dpu_crtc = NULL;
> -       int i;
> +       int i, ret;
>
>         dpu_crtc = kzalloc(sizeof(*dpu_crtc), GFP_KERNEL);
>         if (!dpu_crtc)
> @@ -1534,6 +1547,11 @@ struct drm_crtc *dpu_crtc_init(struct drm_device *dev, struct drm_plane *plane,
>         /* initialize event handling */
>         spin_lock_init(&dpu_crtc->event_lock);
>
> +       ret = drm_self_refresh_helper_init(crtc);
> +       if (ret)
> +               DPU_ERROR("Failed to initialize %s with SR helpers %d\n",
> +                       crtc->name, ret);
> +
>         DRM_DEBUG_KMS("%s: successfully initialized crtc\n", dpu_crtc->name);
>         return crtc;
>  }
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index 1e648db..461fdd1 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -217,6 +217,14 @@ static u32 dither_matrix[DITHER_MATRIX_SZ] = {
>         15, 7, 13, 5, 3, 11, 1, 9, 12, 4, 14, 6, 0, 8, 2, 10
>  };
>
> +static inline bool is_self_refresh_active(struct drm_crtc_state *state)
> +{
> +       if (state && state->self_refresh_active)
> +               return true;
> +
> +       return false;
> +}
> +
>  static void _dpu_encoder_setup_dither(struct dpu_hw_pingpong *hw_pp, unsigned bpc)
>  {
>         struct dpu_hw_dither_cfg dither_cfg = { 0 };
> @@ -600,6 +608,9 @@ static int dpu_encoder_virt_atomic_check(
>
>         trace_dpu_enc_atomic_check(DRMID(drm_enc));
>
> +       if (crtc_state->self_refresh_active)
> +               return ret;
> +

Why?


>         /* perform atomic check on the first physical encoder (master) */
>         for (i = 0; i < dpu_enc->num_phys_encs; i++) {
>                 struct dpu_encoder_phys *phys = dpu_enc->phys_encs[i];
> @@ -1138,15 +1149,19 @@ void dpu_encoder_virt_runtime_resume(struct drm_encoder *drm_enc)
>         mutex_unlock(&dpu_enc->enc_lock);
>  }
>
> -static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
> +static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc,
> +       struct drm_atomic_state *state)
>  {
>         struct dpu_encoder_virt *dpu_enc = NULL;
>         int ret = 0;
>         struct msm_drm_private *priv;
>         struct drm_display_mode *cur_mode = NULL;
> +       struct drm_crtc_state *old_crtc_state;
> +       struct drm_crtc *crtc;
>
>         dpu_enc = to_dpu_encoder_virt(drm_enc);
>
> +       crtc = dpu_enc->crtc;
>         mutex_lock(&dpu_enc->enc_lock);
>         cur_mode = &dpu_enc->base.crtc->state->adjusted_mode;
>         priv = drm_enc->dev->dev_private;
> @@ -1170,21 +1185,59 @@ static void dpu_encoder_virt_enable(struct drm_encoder *drm_enc)
>
>         _dpu_encoder_virt_enable_helper(drm_enc);
>
> -       dpu_enc->enabled = true;
> +       /* Coming back from self refresh, exit PSR */
> +       if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS &&
> +                       is_self_refresh_active(old_crtc_state))
> +               msm_dp_display_set_psr(dpu_enc->dp, false);
>
> +       if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS &&
> +                       !is_self_refresh_active(old_crtc_state)) {
> +               ret = msm_dp_display_enable(dpu_enc->dp, drm_enc);

You shouldn't call msm_dp_display_*() directly.

I might be wrong, but I think that these function calls should be
moved into dp_bridge code instead of taking place here.

> +               if (ret) {
> +                       DPU_ERROR_ENC(dpu_enc, "dp display enable failed: %d\n",
> +                               ret);
> +                       goto out;
> +               }
> +       }
> +
> +       dpu_enc->enabled = true;
>  out:
>         mutex_unlock(&dpu_enc->enc_lock);
>  }
>
> -static void dpu_encoder_virt_disable(struct drm_encoder *drm_enc)
> +static void dpu_encoder_virt_disable(struct drm_encoder *drm_enc,
> +       struct drm_atomic_state *state)
>  {
>         struct dpu_encoder_virt *dpu_enc = NULL;
>         struct msm_drm_private *priv;
> +       struct drm_crtc *crtc;
> +       struct drm_crtc_state *old_state;
>         int i = 0;
>
>         dpu_enc = to_dpu_encoder_virt(drm_enc);
>         DPU_DEBUG_ENC(dpu_enc, "\n");
>
> +       if (!drm_enc) {
> +               DPU_ERROR("invalid encoder\n");
> +               return;
> +       }
> +       dpu_enc = to_dpu_encoder_virt(drm_enc);
> +
> +       crtc = dpu_enc->crtc;
> +
> +       /* Enter PSR if encoder supports */
> +       if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS  && is_self_refresh_active(crtc->state))
> +               msm_dp_display_set_psr(dpu_enc->dp, true);
> +
> +       old_state = drm_atomic_get_old_crtc_state(state, crtc);
> +
> +       if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && is_self_refresh_active(old_state)) {
> +               msm_dp_display_set_psr(dpu_enc->dp, false);
> +               if (msm_dp_display_disable(dpu_enc->dp, drm_enc))
> +                       DPU_ERROR_ENC(dpu_enc, "dp display disable failed\n");
> +               return;
> +       }
> +
>         mutex_lock(&dpu_enc->enc_lock);
>         dpu_enc->enabled = false;
>
> @@ -1194,6 +1247,9 @@ static void dpu_encoder_virt_disable(struct drm_encoder *drm_enc)
>
>         /* wait for idle */
>         dpu_encoder_wait_for_event(drm_enc, MSM_ENC_TX_COMPLETE);
> +       if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && !is_self_refresh_active(crtc->state))
> +               if (msm_dp_display_pre_disable(dpu_enc->dp, drm_enc))
> +                       DPU_ERROR_ENC(dpu_enc, "dp display push idle failed\n");
>
>         dpu_encoder_resource_control(drm_enc, DPU_ENC_RC_EVENT_PRE_STOP);
>
> @@ -1204,7 +1260,6 @@ static void dpu_encoder_virt_disable(struct drm_encoder *drm_enc)
>                         phys->ops.disable(phys);
>         }
>
> -
>         /* after phys waits for frame-done, should be no more frames pending */
>         if (atomic_xchg(&dpu_enc->frame_done_timeout_ms, 0)) {
>                 DPU_ERROR("enc%d timeout pending\n", drm_enc->base.id);
> @@ -1219,6 +1274,10 @@ static void dpu_encoder_virt_disable(struct drm_encoder *drm_enc)
>
>         DPU_DEBUG_ENC(dpu_enc, "encoder disabled\n");
>
> +       if (drm_enc->encoder_type == DRM_MODE_ENCODER_TMDS && !is_self_refresh_active(crtc->state))
> +               if (msm_dp_display_disable(dpu_enc->dp, drm_enc))
> +                       DPU_ERROR_ENC(dpu_enc, "dp display disable failed\n");
> +
>         mutex_unlock(&dpu_enc->enc_lock);
>  }
>
> @@ -2094,8 +2153,8 @@ static void dpu_encoder_frame_done_timeout(struct timer_list *t)
>
>  static const struct drm_encoder_helper_funcs dpu_encoder_helper_funcs = {
>         .mode_set = dpu_encoder_virt_mode_set,
> -       .disable = dpu_encoder_virt_disable,
> -       .enable = dpu_encoder_virt_enable,
> +       .atomic_disable = dpu_encoder_virt_disable,
> +       .atomic_enable = dpu_encoder_virt_enable,

Please split this into a separate commit. First you convert
dpu_encoder to use atomic_enable/atomic_disable, then you add PSR
support.

>         .atomic_check = dpu_encoder_virt_atomic_check,
>  };
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 47fe11a..aed8e09 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -495,7 +495,7 @@ static void dpu_kms_wait_for_commit_done(struct msm_kms *kms,
>                 return;
>         }
>
> -       if (!crtc->state->active) {
> +       if (!crtc->state->active && !crtc->state->self_refresh_active) {

drm_atomic_crtc_effectively_active() ?

>                 DPU_DEBUG("[crtc:%d] not active\n", crtc->base.id);
>                 return;
>         }
> --
> 2.7.4
>


--
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux