Re: [PATCH] drm/msm: populate intf_audio_select() base on hardware capability

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 2/11/2022 4:08 PM, Dmitry Baryshkov wrote:
On 12/02/2022 02:23, Kuogee Hsieh wrote:
intf_audio_select() callback function use to configure
HDMI_DP_CORE_SELECT to decide audio output routes to HDMI or DP
interface. HDMI is obsoleted at newer chipset. To keep supporting
legacy hdmi application, intf_audio_select call back function have
to be populated base on hardware chip capability where legacy
chipsets have has_audio_select flag set to true.

So, after thinking more about the patch, I have a bunch of questions:

You are enabling this callback only for sdm845 and sm8150.

Does this register exist on other (newer) platforms (but just defaults to DP)?

The register itself exists but there is no logic associated with it. Its a no-op.


Neither sdm845 nor sm8150 support INTF_HDMI. What's the purpose of the register on these platforms?

Yes we also had a similar thought earlier that this register has meaning only on chipsets which have HDMI and DP but our hardware team suggested sm8250 and its derivatives should be the cut-off point to stop using this register. So we are just following that.


Does that mean that we should program the register for HDMI (e.g. on 8998)?

Yes, we should program this for HDMI 8998 ( although the default value of the register is 0 for HDMI ).

And, as you are touching this piece of code, how do we control audio routing on newer platforms which have several hardware DP interfaces?

Thats unrelated to this register because on newer chipsets which have two DPs there is no HDMI and hence this register remains a no-op.

But coming to the overall question on multi-DP audio.

This is not a new question. I had first asked about this to Bjorn for sc8180x. The current hdmi-codec interface which is used for single DP audio will have to be extended to support this to support which stream to pass the audio on. This is an open item which was left to be done later on because the only chipset which has multi-DP in upstream is sc8180x. We dont have that hardware with us for development. When we start working on that, we will have to implement what I just mentioned.

Thanks

Abhinav



Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
---
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 2 ++
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c     | 9 ++++++---
  3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 272b14b..23680e7 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -201,6 +201,7 @@ static const struct dpu_caps sdm845_dpu_caps = {
      .has_dim_layer = true,
      .has_idle_pc = true,
      .has_3d_merge = true,
+    .has_audio_select = true,
      .max_linewidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
      .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
      .max_hdeci_exp = MAX_HORZ_DECIMATION,
@@ -229,6 +230,7 @@ static const struct dpu_caps sm8150_dpu_caps = {
      .has_dim_layer = true,
      .has_idle_pc = true,
      .has_3d_merge = true,
+    .has_audio_select = true,
      .max_linewidth = 4096,
      .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
      .max_hdeci_exp = MAX_HORZ_DECIMATION,
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index e5a96d6..b33f91b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -357,6 +357,7 @@ struct dpu_caps {
      bool has_dim_layer;
      bool has_idle_pc;
      bool has_3d_merge;
+    bool has_audio_select;
      /* SSPP limits */
      u32 max_linewidth;
      u32 pixel_ram_size;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
index 282e3c6..e608f4d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.c
@@ -261,14 +261,17 @@ static void dpu_hw_intf_audio_select(struct dpu_hw_mdp *mdp)
  }
  static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
-        unsigned long cap)
+        unsigned long cap,
+        const struct dpu_mdss_cfg *m)
  {
      ops->setup_split_pipe = dpu_hw_setup_split_pipe;
      ops->setup_clk_force_ctrl = dpu_hw_setup_clk_force_ctrl;
      ops->get_danger_status = dpu_hw_get_danger_status;
      ops->setup_vsync_source = dpu_hw_setup_vsync_source;
      ops->get_safe_status = dpu_hw_get_safe_status;
-    ops->intf_audio_select = dpu_hw_intf_audio_select;
+
+    if (m->caps->has_audio_select)
+        ops->intf_audio_select = dpu_hw_intf_audio_select;
  }
  static const struct dpu_mdp_cfg *_top_offset(enum dpu_mdp mdp,
@@ -320,7 +323,7 @@ struct dpu_hw_mdp *dpu_hw_mdptop_init(enum dpu_mdp idx,
       */
      mdp->idx = idx;
      mdp->caps = cfg;
-    _setup_mdp_ops(&mdp->ops, mdp->caps->features);
+    _setup_mdp_ops(&mdp->ops, mdp->caps->features, m);
      return mdp;
  }





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux