Add support for the eDP panel on sc7280 CRD platform. The eDP panel does not need HPD line for connect disconnect. So, this series will report eDP as always connected. The driver needs to register for IRQ_HPD only for eDP. This support will be added later. These changes are dependent on the following series: https://patchwork.kernel.org/project/linux-arm-msm/list/?series=586263&archive=both&state=* https://patchwork.kernel.org/project/linux-arm-msm/list/?series=560587&state=%2A&archive=both Sankeerth Billakanti (5): dt-bindings: display: simple: Add sharp LQ140M1JW46 panel arm64: dts: qcom: sc7280: Add support for eDP panel on CRD arm64: dts: qcom: sc7280: rename edp_out label to mdss_edp_out drm/panel-edp: Add eDP sharp panel support drm/msm/dp: Add driver support to utilize drm panel .../bindings/display/panel/panel-simple.yaml | 2 + arch/arm64/boot/dts/qcom/sc7280-crd.dts | 120 +++++++++++++++++++++ arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 +- drivers/gpu/drm/msm/dp/dp_display.c | 6 ++ drivers/gpu/drm/msm/dp/dp_drm.c | 62 +++++++++-- drivers/gpu/drm/msm/dp/dp_parser.h | 3 + drivers/gpu/drm/panel/panel-edp.c | 44 ++++++++ 7 files changed, 228 insertions(+), 11 deletions(-) -- 2.7.4
