[PATCH] venus: venc: Fix h264 8x8 transform control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



During encoder driver open controls are initialized via a call
to v4l2_ctrl_handler_setup which returns EINVAL error for
V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM v4l2 control. The control
default value is disabled and because of firmware limitations
8x8 transform cannot be disabled for the supported HIGH and
CONSTRAINED_HIGH profiles.

To fix the issue change the control default value to enabled
(this is fine because the firmware enables 8x8 transform for
high and constrained_high profiles by default). Also, correct
the checking of profile ids in s_ctrl from hfi to v4l2 ids.

Fixes: bfee75f73c37 ("media: venus: venc: add support for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM control")
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
---
 drivers/media/platform/qcom/venus/venc.c       | 4 ++--
 drivers/media/platform/qcom/venus/venc_ctrls.c | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/qcom/venus/venc.c b/drivers/media/platform/qcom/venus/venc.c
index 84bafc3118cc..adea4c3b8c20 100644
--- a/drivers/media/platform/qcom/venus/venc.c
+++ b/drivers/media/platform/qcom/venus/venc.c
@@ -662,8 +662,8 @@ static int venc_set_properties(struct venus_inst *inst)
 
 		ptype = HFI_PROPERTY_PARAM_VENC_H264_TRANSFORM_8X8;
 		h264_transform.enable_type = 0;
-		if (ctr->profile.h264 == HFI_H264_PROFILE_HIGH ||
-		    ctr->profile.h264 == HFI_H264_PROFILE_CONSTRAINED_HIGH)
+		if (ctr->profile.h264 == V4L2_MPEG_VIDEO_H264_PROFILE_HIGH ||
+		    ctr->profile.h264 == V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_HIGH)
 			h264_transform.enable_type = ctr->h264_8x8_transform;
 
 		ret = hfi_session_set_property(inst, ptype, &h264_transform);
diff --git a/drivers/media/platform/qcom/venus/venc_ctrls.c b/drivers/media/platform/qcom/venus/venc_ctrls.c
index 1ada42df314d..ea5805e71c14 100644
--- a/drivers/media/platform/qcom/venus/venc_ctrls.c
+++ b/drivers/media/platform/qcom/venus/venc_ctrls.c
@@ -320,8 +320,8 @@ static int venc_op_s_ctrl(struct v4l2_ctrl *ctrl)
 		ctr->intra_refresh_period = ctrl->val;
 		break;
 	case V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM:
-		if (ctr->profile.h264 != HFI_H264_PROFILE_HIGH &&
-		    ctr->profile.h264 != HFI_H264_PROFILE_CONSTRAINED_HIGH)
+		if (ctr->profile.h264 != V4L2_MPEG_VIDEO_H264_PROFILE_HIGH &&
+		    ctr->profile.h264 != V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_HIGH)
 			return -EINVAL;
 
 		/*
@@ -457,7 +457,7 @@ int venc_ctrl_init(struct venus_inst *inst)
 			  V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MIN_QP, 1, 51, 1, 1);
 
 	v4l2_ctrl_new_std(&inst->ctrl_handler, &venc_ctrl_ops,
-			  V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM, 0, 1, 1, 0);
+			  V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM, 0, 1, 1, 1);
 
 	v4l2_ctrl_new_std(&inst->ctrl_handler, &venc_ctrl_ops,
 			  V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MIN_QP, 1, 51, 1, 1);
-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux