On Fri, 4 Feb 2022 14:06:07 -0800, Douglas Anderson wrote:
> Add the new herobrine-r1. Note that this is pretty much a re-design
> compared to herobrine-r0 so we don't attempt any dtsi to share stuff
> between them.
>
> This patch attempts to define things at 3 levels:
>
> 1. The Qcard level. Herobrine includes a Qcard PCB and the Qcard PCB
> is supposed to be the same (modulo stuffing options) across
> multiple boards, so trying to define what's there hopefully makes
> sense. NOTE that newer "CRD" boards from Qualcomm also use
> Qcard. When support for CRD3 is added hopefully it can use the
> Qcard include (and perhaps we should even evaluate it using
> herobrine.dtsi?)
> 2. The herobrine "baseboard" level. Right now most stuff is here with
> the exception of things that we _know_ will be different per
> board. We know that not all boards will have the same set of eMMC,
> nvme, and SD. We also know that the exact pin names are likely to
> be different.
> 3. The actual "board" level, AKA herobrine-rev1.
>
> [...]
Applied, thanks!
[1/1] arm64: dts: qcom: sc7280: Add herobrine-r1
commit: 116f7cc43d28ccd621ff1fecc9526c65dde28dcd
Best regards,
--
Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
