[PATCH v3 09/14] arm64: dts: qcom: sc7280: Disable pull from pcie1_clkreq

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I believe that the PCIe clkreq pin is an output. That means we
shouldn't have a pull enabled for it. Turn it off.

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---

Changes in v3:
- ("sc7280-idp: Disable pull from pcie1_clkreq") new for v3.

 arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts | 2 +-
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi                   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
index 82c3c8f0342b..3c5aab225748 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
@@ -827,7 +827,7 @@ &usb_2_hsphy {
 /* PINCTRL - additions to nodes defined in sc7280.dtsi */
 
 &pcie1_clkreq_n {
-	bias-pull-up;
+	bias-disable;
 	drive-strength = <2>;
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 6e20e8c07402..9140dca3b72a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -367,7 +367,7 @@ key_vol_up_default: key-vol-up-default {
 };
 
 &pcie1_clkreq_n {
-	bias-pull-up;
+	bias-disable;
 	drive-strength = <2>;
 };
 
-- 
2.35.0.rc2.247.g8bbb082509-goog




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux